CENTRAL INSTITUTE OF TECHNOLOGY ... - CIT, Kokrajhar...

hardware to be Hettich/Hafele or equivalent makes. The exact design of the unit will be provided bythe Institute; hence you are requested to submit item designs also.11. Wardrobe:Modular Wardrobe of appropriate size. Upper, Middle, Side back, small drawer bottom & DrawerBottom are 8mm thick pre laminated in MDF panels. Remaining all panels are 18mm thick exteriorgrade both side lamination MDF. All exposed panel coved by 2mm pvc by machine with hot meltglue at .All shutters are 18mm thick post formed exterior grade MDF panels are fitted withauto close hinge .The high quality hardware used like wardrobe lock, hanger bracket, tie rod Rollerslides, Hinges, Minifix, wooden dowels is of make Hettich of Haffle 36mm thick post formedmolding is required as per design. Locker and drawer is required in side of the wardrobe. 1ft lengthSS Finish design handle is required which is from Hettich or Haffle. All panel edges are covered by2mm PVC with hot melt glue at by machine. All hardware to be Hettich/Hafele or equivalentmakes. The exact design of the unit will be provided by the Institute; hence you are requested tosubmit item designs also.12. Study Table:Modular Study Table of appropriate size. The unit will be fabricated out of 25mm thick particle boardin post formed pattern, pasted with 0.6mm thick flexi laminated in front of approved shade andbalancer inside. The sides will be made of 18mm thick particle board in post formed pattern. Themodesty panel will be of 12mm thick pre laminated board of approved shade. One 450mm widthstorage area will be provided with the table. The storage area will have three nos. of drawers fittedwith meta boxes. All the exposed edges will have PVC edge banding. The entire work will becompleted including supply of handles, hinges as required. All the hardware‟s will be fromhettich/hafele Germany. The exact design of the unit will be provided by the Institute; hence you arerequested to submit item designs also.13. Shoe Rack:Modular Shoe rack of appropriate size. The shelves, sides, top and the bottom of the unit will befabricated out of 25mm thick particle board of approved shade. The back of the unit will be made outof 12mm thick particle board. All the exposed edges will have PVC edge banding. The entire workwill be completed including supply of handles, hinges as required. All the hardware‟s will be fromhettich/hafele Germany. The exact design of the unit will be provided by the Institute; hence you arerequested to submit item designs also.14. Luggage Rack:25