oldhippy2015.pdf

20.08.2015 Views

FLASHBACK...1640Flashback Chairwith Cohen LegsStarting at $1449.00KENDALL...1640Flashback ChairStarting at $1206.00Page 84PricingBased On FabricCost Of $50.00 PerYard1935 Kendall SofaStarting at $4053.001938 ottomanStarting at $893.00Old Hippy fully upholstered furniture begins with hand built hardwoodframes that are glued and screwed. EKS no sag clips secure the seat deckthat is equipped by way of eight-gauge no-sag wire springs, with eightgaugecross wires that are pressure clipped with steel clamps. This equalizes a seatdeck that works as a unit, not individually. This method provides many years ofcomfort and dependable functionality. Developed in the 1900’s, the no-sag spring

cohencomfort1625CohenStartingat $7449.00SOFAS1625 Sectional Sofa Chaise1645 Flashback Chairs3005 / 3007 Shavargo Occasional Tablesapproach was a welcomed change for the betterand a positive improvement. All seats are selfdecked.A soft front edge is achieved with a fishmouth spring system; by means of an eight-gaugepressure clipped front edge. When selected thehard front edge is hog ringed and the cushionwell is supported. A cushion well is an upholsteryterm meaning a sunken area (well) that holds thecushion from sliding forward and off the deck.Arms are hand moulded forming the foam to the arms before the fabric is applied.Old Hippy soft back cushions are the result of hand fit back springs that areexpertly adjusted to optimum tension. The highest quality foam available is used,and lots of it. The outside back and sides are padded and webbed, supporting thefabric. Old Hippy is more than comfort; it also has an inner magnificence, builtto last many lifetimes.Page 85

FLASHBACK...1640Flashback Chairwith Cohen LegsStarting at $1449.00KENDALL...1640Flashback ChairStarting at $1206.00Page 84PricingBased On FabricCost Of $50.00 PerYard1935 Kendall SofaStarting at $4053.001938 ottomanStarting at $893.00Old Hippy fully upholstered furniture begins with hand built hardwoodframes that are glued and screwed. EKS no sag clips secure the seat deckthat is equipped by way of eight-gauge no-sag wire springs, with eightgaugecross wires that are pressure clipped with steel clamps. This equalizes a seatdeck that works as a unit, not individually. This method provides many years ofcomfort and dependable functionality. Developed in the 1900’s, the no-sag spring

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!