AUTOMATIC FEEDERS

20101022010102The universal support it’s placeddirectly on the baty instead of themotor engine. This allow a moresteady movement and a quick setup of the feeder.DIMENSIONSSEMI-HUB SYSTEMPatented Semi-hub system,the two aluminium hubs areindependent from the rubberwheel and they allow thesubstitution of the rubber onlywith a significant save of costsand of the rollers wear up to51%.The drive unit assembly is fittedon screened rolling ballbearings (6002 z2), this allowto reduce the inner frictionwith no need of LUBRICATIONand MAINTENANCE with asignificant power save.STEFF 2033is the latestevolution ofSteff line andit represents avery advancedproductamong feedersSTEFF 2033is a vanguardmachine theresult of longstudies.This medium-size power feeder it has been specifically conceivedto be used on semi-professional machines like combined multiworkingmachines, traditional medium-size machines, smalledge banders and belt sanders machines.• 3 rollers – 8 steady speeds back and forward motion.4 speeds are obtained by changing the position of the gears insidethe housing, while other 4 speeds result from the switching ofthe bipolar engine (1400- 2800 r.p.m.)• Motor power enables any kind of feeding.• Resistant and protective electrostatic powder-paint• Interchangeable gears have been sintered, carbonitried andtempered.• Case-hardened and rectified endless screw of the motor shaftenables perfect matching of the bronze aluminium crown wheel(BR/AL UNI 5275) with reducer unit.• The kind of oil we use for the reducer (Mellana 150 IP or similar)ensures unlimited lubrication.TECHNICAL DATAMOTOR POWER 0,74/0,50 HP0,55/0,37 KwFEEDING SPEEDS 2,5-5,5-7-11-1421-27-54 m/minFEEDING SPEEDSZ25ROLLER N. 3Ø OF ROLLERS 100 mmROLLER WIDTH 50 mmROLLER SPRING EXCURSION 15 mm40222,5 - 7 - 11 - 27m/min5,5 - 14 - 21 - 54m/minTOTAL NET WEIGHT 41 KgTOTAL GROSS WEIGHT 45 Kg4323