OptiCut Highspeed Series - WEINIG

6 7Integration of scanner technologyAutomatic sortingOptiCut Stacker: Automatic stackingThe OptiCut 450 FJ+ is characterised bya special feed system which ensures securetransportation of even the shortestpieces of quality wood. Thus, the machineretains full control at the end of theboard over short parts up to 110 mm,that are reliably separated from the wasteand transferred to the sorting station.This results in a hugely increased yield incase of finger jointing operation. Thanksto their outstanding performance,OptiCut high-speed saws are ideal foruse with automatic feed systems, scannersas well as the OptiCut Stacker. TheDIMTER project planning team helps youplan your cutting lines, whether it is linkedmachines, unmanned production orhigh-performance installations you’reafter.DIMTER OptiCut 450 XL:high performance – even with extra-large cross sectionsThe OptiCut 450 XL is equipped withextra-wide feed rollers which bring ahigher torque to bear on heavy timbersections. Despite the large cross sections,a surprisingly high cutting capacityand linear accuracy are achieved. Thefeed speed can be switched between120 m/min. and 180 m/min. dependingon the relevant cross section. Andsuitable feed, marking and sorting solutionsare of course also available for theOptiCut 450 XL – including onesspecially designed for heavy timber.