Attachment - KUHN farm machinery

4830 IN-LINE RIPPER112 kW / 150 hp – 268 kW / 360 hpThe durable 4830 In-Line Ripper provides efficient compactionremoval, while allowing crop residue to remain undisturbed onthe surface. This allows for good root development and waterinfiltration into the soil, in areas requiring increased surface residueor no-till farming. Primary tillage with minimal disturbance of residue and soil surface Removes soil compaction from 20 – 40 cm (8" – 16") allowing increased root development 3-Point or Pull-Type configuration Working width: 3.8 – 6.8 m (12'6" – 22'6")Model Specifications 4830–5R 4830–6R 4830–7R 4830–7F 4830–8F 4830–9FWorking width (m/ft) 3.8 / 12'6" 4.6 / 15' 5.3 / 17'6" 5.3 / 17'6" 6.1 / 20' 6.8 / 22'6"Frame type Rigid FoldingNumber of shanks and coulters 5 6 7 7 8 9Coulter size (cm/in) 55.8 / 22"Shank spacing (cm/in) 76 / 30"Transport width (m/ft) 3.4 / 11'1" 4.3 / 14'3" 4.9 / 15'11" 3.5 / 11'5" 3.5 / 11'5" 4.4 / 14'5"Weight (kg/lbs) 1660 / 3660 2031 / 4479 2271 / 5008 2433 / 5364 2750 / 6063 3151 / 6947Working depth (min/max) (cm/in) 20.3 – 40.6 / 8" – 16"Tractor power range (kW/hp pto)112 – 149 / 134 – 179 / 157 – 209 / 157 – 209 / 179 – 239 / 201 – 268 /150 – 200 180 – 240 210 – 280 210 – 280 240 – 320 270 – 360Recommended speed of operation(km/h / mph)6 – 12 / 4 – 7Primary tillage with minimal residue and surface disturbance – double-bar frame – spring-reset shank mounts, no-till shanks with wear bars – pivoting,individual coulters – LED lights - optional no-till closing wheel attachment, pull-hitch

8300 DISC HARROWClass III - Primary Tillage118 kW / 159 hp – 278 kW / 373 hpClass III Disc Harrows provide primary tillage operation where maximum soil penetration and residuemixing is required. Residue Razor disc blades with approximately 245 lbs (110 kg) per blade offerconsistent residue cutting and soil penetration in a variety of conditions. A wide range of widths areavailable for a variety of tractor power requirements, and Quad-Fold sizes provide exceptional transportdimensions. Heavy crop residue management Residue Razor disc blades for superior residue cutting and soil penetration Rock-Flex bearing arms for protection from stony conditions or hard soil conditions Working width: 6 – 11.3 m (19'10" – 37'3")Model Specifications 8300–19W 8300–22W 8300–25W 8300–28W 8300–31W 8300–34W 8300–37WQFWorking width (m/ft) 6.0 / 19'10" 6.9 / 22'11" 7.5 / 24'7" 8.5 / 27'9" 9.4 / 30'11" 10.4 / 34'1" 11.3 / 37'3"Disc diameter (cm/in) 66/26"Number of discs 50 58 62 68 76 84 92Disc spacing (cm/in) 25.4/10"Number of bearings arms 16 18 20 20 22 24 28Transport width* (m/ft) 3.7 / 12'2" 3.7 / 12'2" 4.3 / 14'1" 5.2 / 17' 5.2 / 17' 5.2 / 17' 5.4 / 17'7"Transport height* (m/ft) 3.2 / 10'9" 3.7 / 12'2" 3.6 / 11'11" 4.0 / 13' 4.2 / 13'10" 4.4 / 14'8" 4.1 / 13'5"Weight (kg/lbs)5488 /6366 /6805 /7831 /12,10114,03615,00417,265Max. working depth (cm/in) 20.3 / 8"Tractor power range (kW/hp pto)118 – 148 / 137 – 171 / 147 – 183 / 166 – 207 /159 – 198 183 – 229 197 – 246 222 – 278Recommended speed of operation(km/h / mph)6 – 10 / 4 – 6* May vary with harrow attachment.DISC COMPONENTS - A STORY OF STRENGTHKuhn Krause is proud to offer Residue Razor Disc Blades from Ingersoll as the standard sharp blade option for all discharrows. This blade has an exceptionally sharp edge, 5 times sharper than conventional blades, for: Improved residue cutting Increased soil penetration Continued blade strength and durabilityKuhn Krause heavy ductile cast spools multiply the strength of the disc gang, making it the strongest in the industry. Kuhn Krause spools are machinedfor an exact fit on the tie rod and precision faced to perfectly match the surface of the disc blade. A larger bell on the convex end and a smaller bell on theconcave end provides an overlap fit against the Residue Razor blades. This design supports the disc blade more positively without creating a "stress line"like competitive designs.8360 /18,432184 – 231 /247 – 3099273 /20,,445203 – 254 /273 – 34111,146 /24573222 – 278 /298 – 373Folding frame – single-point hydraulic depth control – Rock-Flex bearing arms – Residue Razor disc blades – aggressive 22° front gang angle – adjustable dual scrapersat bearing arms – walking tandem wheels – LED lights – optional 24/7 harrow attachments or rear hitch – innovative Quad-Fold system on largest size – optional GuardianHitchRock-Flex bearing arms flex over thetoughest obstacles. Kuhn Krause'sexacting manufacturing process forRock-Flex arms includes heat treatingfor durability and shot peening torelieve stress. Lubrication accessto the SuperSeal gang bearings isthrough the protection of the Rock-Flex standard itself.Kuhn Krause SuperSeal regreasablegang bearings are very tough anddurable. First they're protected in aductile cast iron holder and encasedin a heavy rubber boot to absorbshock. The triple lip seal has an extraheavy outer lip to resist wear and keepdirt out. The grease fitting is aligneddirectly with the lube hole in thebearing for positive greasing directlyinto the cartridge.

TL 6200 LANDSMANCombination Soil Finisher94 kW / 126 hp – 302 kW / 405 hpTL 6200 Landsman delivers excellent residue flow handlingcapability, soil mixing, conditioning and leveling in one pass.Shallow concavity 20" Residue Razor blades size residue uniformlyand minimize lateral soil movement to mix soil and residue withoutcreating ridges. Shallow concavity Residue Razor disc blades cut residue and begin mixing soil Spring shanks on a deep frame allow exceptional residue flow through the machine Variety of harrow options for superior seedbed leveling and preparation Working width: 3-section, single fold – 5.5 – 9.7 m (18' – 31'6")5-section, double fold - 11 – 13.8 m (36' – 45')Model Specifications 3-Section, Single-Fold Models 5-Section, Double-Fold ModelsWorking width (m/ft) 5.5 – 9.7 / 18' – 31'6" 11 – 13.8 / 36' – 45'Number of discs 24 – 40 46 – 62Number of shanks 25 – 53 49 – 77Shank spacing (cm/in) 17.8 / 7"Transport width (m/ft) 3.7 or 4.6 / 12' or 14'1" (depending on model) 4.6 / 14'1"Transport height (m/ft) 2.9 – 4.5 / 9'6" – 14'6" 3.5 or 4.2 / 11'6" or 13'6"Weight (kg/lbs) 6976 / 15,379 9719 / 21,426Working depth (min/max) (cm/in) 2.5 – 15.2 / 1" – 6"Tractor power range (kW/hp pto) 94 – 164 / 126 – 284 188 – 302 / 252 – 405Recommended speed of operation(km/h / mph)8 – 12 / 5 – 7Seedbed preparation, residue cutting and soil mixing – deep frame for exceptional residue flow – single-point hydraulic depth control – mechanical or hydraulicadjust 20" discs cut residue and begin mixing soil – spring shanks provide uniform seedbed tillage – variety of 24/7 harrow options – walking tandem wheels –LED lights – optional Guardian Hitch

TL 6400 LANDSTARCombination Soil Finisher94 kW / 126 hp – 242 kW / 324 hpTL 6400 Landstar delivers excellent residue flow handling capability,soil mixing, conditioning and leveling in one pass. Shallow concavity20" Residue Razor blades size residue uniformly and minimizelateral soil movement to mix soil and residue without creating ridges.Exclusive Star Wheels on TL 6400 Landstar models cut clods, levelridges and evently distribute residue. Shallow concavity Residue Razor disc blades cut residue and begin mixing soil Exclusive Star Wheel Variety of harrow options for superior seed bed leveling and preparation Spring shanks on a deep frame allow exceptional residue flow through the machine Working width: 3-section, single fold – 5.5 – 9.7 m (18' – 31'6")5-section, double fold – 11 m (36')Model Specifications 3-Section, Single-Fold Models 5-Section, Double-Fold ModelsWorking width (m/ft) 5.5 – 9.7 / 18' – 31'6" 11 / 36'Number of discs 24 – 40 46Number of shanks 25 – 43 49Shank spacing (cm/in) 22.8 / 9"Transport width (m/ft) 3.7 or 4.6 / 12' or 14'1" (depending on model) 4.60 / 14'1"Transport height (m/ft) 2.9 – 4.5 / 9'6'' – 14'6" 3.50 / 11'6"Weight (kg/lbs) 7564 / 16,676 9040 / 19,930Working depth (min/max) (cm/in) 2.5 – 15.2 / 1" – 6"Tractor power range (kW/hp pto) 94 – 211 / 126 – 284 188 – 242 / 252 – 324Recommended speed of operation(km/h / mph)8 – 12 / 5 – 7Seedbed preparation, residue cutting and soil mixing – deep frame for exceptional residue flow – single-point hydraulic depth control – mechanical or hydraulicadjust 20" discs cut residue and begin mixing soil – spring shanks provide uniform seedbed tillage – exclusive Star Wheel – variety of 24/7 harrow options –walking tandem wheels – LED lights – optional Guardian Hitch

5635 FIELD CULTIVATOR91 kW / 123 hp – 301 kW / 404 hpThe 5635 Field Cultivator provides increased residue flow betweenthe five rows of shanks for high residue conditions. Uniformcultivation with the split-the-middle sweep pattern leads to betterseed-to-soil contact. The exclusive floating hitch and mechanicaldepth adjustment allow for consistent tillage depth resulting in evengermination and uniform emergence. Shanks on a split-the-middle pattern for full-width seed bed preparation Unique frame construction offers strength while remaining flexible Exclusive floating hitch option and mechanical depth adjustment for superior depth control Working width: 3-section, single fold - 6.2 – 11.1 m (20'6" – 36'6")5-section, double fold - 12 – 15.3 m (39'6" – 50'6")Model Specifications 3-Section, Single-Fold Models 5-Section, Double-Fold ModelsWorking width (m/ft) 6.2 – 11.1 / 20'6" – 36'6" 12 – 15.3 / 39'6" – 50'6"Number of shanks 17 – 29 31 – 37Shank spacing (cm/in) 15.3 / 6"Transport width (m/ft) 4 or 4.6 / 13'3" or 15'3" 4.8 / 15'9"Transport height (m/ft) 2.9 – 4.5 / 9'8" – 14'8'' 4.1 or 4.9 / 13'7" or 16'4"Weight (kg/lbs) 4026 – 5875 / 8877 – 12,954 6777 – 7652 / 14,942 – 16,871Working depth (min/max) (cm/in) 2.5 – 15.2 / 1" – 6"Tractor power range (kW/hp pto) 91 – 218 / 123 – 292 177 – 301 / 237 – 404Recommended speed of operation(km/h / mph)8 – 12 / 5 – 7Seedbed preparation and soil mixing – shanks on a split-the-middle pattern – unique frame construction offers strength while remaining flexible – 139" framewith spring shanks no closer than 31" – mechanical depth control on each frame section – variety of 24/7 harrow options – walking tandem wheels – optional,exclusive floating hitch design – excellent field contouring capability – LED lights – optional Guardian Hitch on larger sizes

5200 CONVENTIONAL AND MINIMUM-TILL GRAIN DRILL134 kW / 180 hp – 161 kW / 216 hp5200 Grain Drills deliver excellent seed placement for conventional or minimum-till conditions.Folding capabilities offer excellent transport dimensions, and the large capacities for seed andfertilizer provide efficient operation. The PRO Openers deliver seed and fertilizer at precisedepth to ensure uniformity in seed-to-soil contact and proper emergence. Seeding capability for conventional or minimum-till field conditions Front mounted transmission drive with easily adjustable seed cups Stainless steel tank floor and fertilizer cups made from non corrosive material provides years of trouble-free operation Working width: 9.1 – 11 m (30' – 36')Model Specifications 5200–30 5200–36Working width (m/ft) 9.1 / 30' 11.0 / 36'Row spacing (cm/in) 15 / 6"Number of openers 60 72Opener diameter (cm/in) 34.3 / 13.5"Transport width (m/ft) 3.9 / 12' 10"Max. hopper capacity (l/bu) 3383 / 96 4052 / 115Seed/fertilizer capacity 60% / 40%Weight (kg/lbs) 6663 / 14,690 7627 / 16,814Tractor power range (kW/hp pto) 134 / 180 161 / 216Recommended speed of operation (km/h / mph) 8 – 12 / 5 – 7Folding frame – drawbar hitch with hydraulic tongue – walking tandem mainframe wheels – Precision Residue Opener – rotary scrapers – front-mountedtransmission drive system – easily adjustable seed cups – digital acre meter – treadwalk - LED lights – narrow opener spacing, dry fertilizer meter and drive, presswheels, row markers5200NT NO-TILL GRAIN DRILL89 kW / 120 hp – 149 kW / 200 hp5200NT No-Till Grain Drills deliver excellent seed placement for heavy residue conditions. Thefront coulters, through the use of hydraulic leverage from the tractor, provide indexed residuecutting for the PRO Openers. These openers deliver seed and fertilizer at precise depth toensure uniformity in seed-to-soil contact and proper emergence. Rugged frame design that integrates the no-till coulter bar for superior residue cutting and overall strength Front-mounted transmission drive with easily adjustable seed cups Stainless steel tank floor and fertilizer cups made from non-corrosive material provides years of trouble-free operation Working Width: 4.5 – 6.0 m (15' – 20')Model Specifications 5200NT–15 5200NT–20Working width (m/ft) 4.5 / 15' 6 / 20'Row spacing (cm/in) 19 / 7.5"Number of openers 24 32Opener diameter (cm/in) 34.3 / 13.5"Transport width (m/ft) 4.8 / 16' 6.4 / 21'Max. hopper capacity (l/bu) 1691 / 48 2255 / 64Seed/fertilizer capacity 60% / 40%Weight (kg/lbs) 4122 / 9088 5100 / 11,243Tractor power range (kW/hp pto) 89 – 112 / 120 – 150 119 – 149 / 160 – 200Recommended speed of operation (km/h / mph) 8 – 12 / 5 – 7Pull-type rigid frame – hydraulic weight transfer tongue – dual wheels – fluted, no-till coulters indexed to openers – Precision Residue Opener – rotary scrapers –front mounted transmission drive system – easily adjustable seed cups – digital acre meter – treadwalk - LED lights – dry fertilizer meter and drive, press wheels,row markers

KUHN extends its Tillage and Seeding offering with a broad range of machines that have wide working widthsand high horsepower capabilities. KUHN Group reinforces itself with a highly-qualified development andproduction facility for large-width tillage and seeding tools and becomes a leader in this field.KUHN Group strengthens its market position in the very important crop production segment with the addition of a new product rangethat perfectly complements existing tillage lines and helps to diversify the Company’s offering in North America and other areas wherethese large-width, high-horsepower machines are in demand.KUHN Group reinforces its long-term growth potential, gaining access to new technology, new resources and new market opportunities.KUHN KRAUSEHutchinson, KS (U.S.A.)KUHN NORTH AMERICABrodhead, WI (U.S.A.)KUHN HUARDChâteaubriant (France)KUHN GELDROPGeldrop (Netherlands)KUHN BLANCHARDChéméré (France)KUHN-AUDUREAULa opechagnière (France)KUHN SASaverne (France)KUHN DO BRAZILPasso Fundo (Brazil)KUHN AUDUREAULa Copechagnière (France)» Bedding and FeedingKUHN GELDROPGeldrop (Netherlands)» Baling and WrappingKUHN NORTH AMERICABrodhead, WI (U.S.A.)» Bedding and Feeding» Manure Spreading» Hay and Forage HarvestingKUHN BLANCHARDChéméré (France)» SprayingKUHN HUARDChâteaubriant (France)» Plowing» Non PTO-Driven Tillage Tools» Precision Seeding» Min-Till or No-Till Seed DrillsKUHN SASaverne (France)» Hay and Forage Harvesting» PTO-Driven Tillage Tools» Conventional Seed DrillsKUHN DO BRAZILPasso Fundo (Brazil)» Min-Till and No-Till Seed DrillsKUHN KRAUSEHutchinson, KS (U.S.A.)» Tillage and SeedingPrinted in USA 706378US 1011 Copyright 2011 Kuhn North America, Inc.Kuhn North America, Inc.Corporate Headquarters - 1501 West Seventh AvenueBrodhead, WI 53520 - Phone: (608) 897-2131 - Fax: (608) 897-2561www.KuhnNorthAmerica.comKuhn Krause, Inc.305 South Monroe StreetHutchinson, KS 67501 - Phone: (620) 663-6161 - Fax: (620) 622-5903www.KuhnKrause.com