Click Pack

More documents

Recommendations

Info

4. After closing the container you can make the container tamperevident. For that purpose the handgrip opposite to the handgripwith the locking button has a loop.5. Push the special sealing pin into the loop until it locks. You can olyseal containers with product codes 45XX with these sealing pins.6. The container is now sealed.For Click Pack with product code 44XX you can also use a sealingstrip. CurTec advises to use Unisto Compact Seals but you canofcourse use any other strip you prefer. Just make sure that theyhave a tail with a minimum length of 225 mm and a maximumdiametre of 2 mm.7. Put the tail of the sealing strip in a sealing loop and pull it down.Push the end through the eye of the strip and pull tight.Click Pack manual 1201
9. The container is now sealed.Contrary to sealing using a pin, which is only possible on thehandgrip with a dedicated loop, you can use a sealing strip on allfour handgrips.Click Pack manual 1201
Page 1 and 2: ManualClick PackApril 2014
Page 3: 1 CloseA rubber mat (red) simplifie
Page 7 and 8: 03 Use1. Filling temperatureThe max
Page 9 and 10: 04 Static loadWhen stacking the Cli
Page 11 and 12: 05 Dynamic loadBefore stacking the
Page 13 and 14: 06 Palletisation1. PalletA pallet m
Page 15: CurTec InternationalSpoorlaan Noord

Click Pack

Create successful ePaper yourself

Delete template?

Save as template?