Click Pack

More documents

Recommendations

Info

3. StackingFilled containers are placed on a flat surface and stacked by placingthe base of the container in the counter shape of the lid.In case a pallet is placed on top of another pallet, the surface needsto be flat and solid to avoid pressure points on the top layer.Attention! The total load on the bottom container of a stack may neverexceed the maximum loads as indicated in the tables of instructions 4and 5.When positioning the Click Packs on a pallet it is important to turn thehandgrips away from the pallet corners to avoid damaging the shrinkwrapor the stretch foil.4. PackingWe recommend the use of a shrink wrap which needs to be shrunkaround the pallet as well. In addition, the bottom of the pallet needsto be stretched with foil as well. The containers at the base of astack will carry most of the load and to avoid a collapse they cannotbe deformed by overstretching the foil or over-heating the wrap.5. Pallet handlingFrom a safety point of view CurTec recommends the transport ofone pallet at a time. In order not to disturb the stack the fork of thelift truck needs to be kept almost horizontal.Click Pack manual 1404
CurTec InternationalSpoorlaan Noord 925121 WX RijenThe NetherlandsUK & Ireland: +44 20 3514 4624North America: +1 908 450 98 16All other countries: +31 88 808 2000curtec.en@curtec.comwww.curtec.comHIGH PERFORMANCE PACKAGING
Page 1 and 2: ManualClick PackApril 2014
Page 3 and 4: 1 CloseA rubber mat (red) simplifie
Page 5 and 6: 9. The container is now sealed.Cont
Page 7 and 8: 03 Use1. Filling temperatureThe max
Page 9 and 10: 04 Static loadWhen stacking the Cli
Page 11 and 12: 05 Dynamic loadBefore stacking the
Page 13: 06 Palletisation1. PalletA pallet m

Click Pack

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?