19.08.2015 Views

Bloodborne Pathogens Exposure Control Plan

Exposure Control Plan - Environmental Health & Safety - University ...

Exposure Control Plan - Environmental Health & Safety - University ...

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Office of the Vice President for ResearchEnvironmental Health and SafetyPolicies, Programsand Procedures17) Where practical, physical barriers (engineering controls) shall be institutedand maintained to protect employees from exposure.18) Mouth pipetting is prohibited.19) Specimens of blood or other potentially infectious materials shall be placedin a container which prevents leakage during collection, handling, processing,storage, transport or shipping.20) Labels that incorporate the universal “Biohazard Symbol" shall be usedwhere required (see Hazard Communication).21) Equipment which may become contaminated with blood or other potentiallyinfectious materials shall be examined prior to servicing or shipping and shallbe decontaminated as necessary unless decontamination is shown to be notfeasible. If complete decontamination is not accomplished, a readilyobservable label shall be attached to the equipment stating which portionsremain contaminated (see sample label A).C) Housekeeping, General:1) Contaminated work surfaces shall be decontaminated with an appropriatetuberculocidal disinfectant after completion of procedures; immediately oras soon as feasible when surfaces are overtly contaminated or after any spillof blood or other potentially infectious materials; and at the end of the workshift if the surface may have become contaminated since the last cleaning.2) An appropriate disinfectant is defined as one that is approved by the U.S.Environmental Protection Agency for the intended use (tuberculocidal) andmixed to the appropriate strength or a 1:10 solution of 5% sodiumhypochlorite (regular strength household bleach) and water. The disinfectantmust be readily available to the work site, maintained at the necessarystrength and afforded adequate contact time to accomplish the goal.3) Protective coverings, such as plastic wrap, aluminum foil, imperviouslybackedabsorbent paper used to cover equipment and environmentalsurfaces, shall be removed and replaced as soon as feasible when theybecome overtly contaminated or at the end of the work shift if they mayhave become contaminated during the shift. If these coverings arecompromised causing contamination of a work surface, see above.4) All bins, pails, cans, and similar receptacles intended for reuse which have areasonable likelihood for becoming contaminated with blood or otherpotentially infectious materials shall be inspected each time before being putinto service and decontaminated after use.5) Broken glassware which may be contaminated with human body fluids shallnot be picked up directly with the hands. It shall be handled using mechanicalmeans, such as a brush and dustpan, tongs or forceps. The contaminated<strong>Exposure</strong> <strong>Control</strong> <strong>Plan</strong>07/22/20159 | P a g e

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!