Symantec VirtualStore 安 装 和 配 置 指 南

Symantec™ VirtualStore 安装和配置指南: Linux Symantec™ VirtualStore 安装和配置指南: Linux

d1mj3xqaoh14j0.cloudfront.net
from d1mj3xqaoh14j0.cloudfront.net More from this publisher
17.08.2015 Views

140 SVS 以 保 持 数 据 完 整 性在 虚 拟 环 境 中 手 动 设 非 SCSI-3 防 护6 在 每 个 节 点 上 , 编 辑 /etc/vxfenmode 文 件 , 如 下 所 示 :loser_exit_delay=55vxfen_script_timeout=25请 参 考 /etc/vxfenmode 文 件 示 例 。7 在 每 个 节 点 上 , 设 LLT sendhbcap 计 时 器 参 数 的 值 , 如 下 所 示 :■ 运 行 以 下 命 令 :lltconfig -T sendhbcap:3000■ 将 以 下 行 添 加 到 /etc/llttab 文 件 , 以 便 在 任 何 重 新 启 动 后 更 改 保 持 不 变 :set-timer senhbcap:30008 在 任 何 一 个 节 点 上 , 编 辑 VCS 文 件 , 如 下 所 示 :■ 使 VCS 文 件 成 为 可 写 的 :# haconf -makerw■对 于 类 型 为 DiskGroup 的 每 个 资 源 , 将 MonitorReservation 属 性 的 值 设 为 0, 而 将 Reservation 属 性 的 值 设 为 NONE。# hares -modify MonitorReservation 0# hares -modify Reservation "NONE"■ 运 行 以 下 命 令 验 证 该 值 :# hares -list Type=DiskGroup MonitorReservation!=0# hares -list Type=DiskGroup Reservation!="NONE"命 令 不 应 列 出 任 何 资 源 。■ 在 类 型 级 别 上 修 改 Reservation 属 性 的 默 认 值 。# haattr -default DiskGroup Reservation "NONE"■ 使 VCS 文 件 成 为 只 读 的 :# haconf -dump -makero9 确 保 VCS 文 件 main.cf 中 的 UseFence 属 性 设 为 SCSI3。10 要 使 这 些 VxFEN 更 改 生 效 , 请 停 止 再 重 新 启 动 VxFEN 依 赖 模 块 。

SVS 以 保 持 数 据 完 整 性在 虚 拟 环 境 中 手 动 设 非 SCSI-3 防 护141■在 每 个 节 点 上 , 运 行 以 下 命 令 以 停 止 VCS:# /etc/init.d/vcs stop■在 VCS 使 所 有 服 务 脱 机 后 , 运 行 以 下 命 令 以 停 止 VxFEN:# /etc/init.d/vxfen stop■在 每 个 节 点 上 , 运 行 以 下 命 令 以 重 新 启 动 VxFEN VCS:# /etc/init.d/vxfen start# /etc/init.d/vcs start非 SCSI-3 防 护 的 /etc/vxfenmode 文 件 示 例================================# vxfen_mode determines in what mode VCS I/O Fencing should work.## available options:# scsi3 - use scsi3 persistent reservation disks# customized - use script based customized fencing# disabled - run the driver but don't do any actual fencing#vxfen_mode=customized# vxfen_mechanism determines the mechanism for customized I/O# fencing that should be used.## available options:# cps - use a coordination point server with optional script# controlled scsi3 disks#vxfen_mechanism=cps## scsi3_disk_policy determines the way in which I/O Fencing# communicates with the coordination disks. This field is required# only if customized coordinator disks are being used.## available options:# dmp - use dynamic multipathing# raw - connect to disks using the native interface#

<strong>配</strong> <strong>置</strong> SVS 以 保 持 数 据 完 整 性在 虚 拟 环 境 中 手 动 设 <strong>置</strong> 非 SCSI-3 防 护141■在 每 个 节 点 上 , 运 行 以 下 命 令 以 停 止 VCS:# /etc/init.d/vcs stop■在 VCS 使 所 有 服 务 脱 机 后 , 运 行 以 下 命 令 以 停 止 VxFEN:# /etc/init.d/vxfen stop■在 每 个 节 点 上 , 运 行 以 下 命 令 以 重 新 启 动 VxFEN <strong>和</strong> VCS:# /etc/init.d/vxfen start# /etc/init.d/vcs start非 SCSI-3 防 护 的 /etc/vxfenmode 文 件 示 例================================# vxfen_mode determines in what mode VCS I/O Fencing should work.## available options:# scsi3 - use scsi3 persistent reservation disks# customized - use script based customized fencing# disabled - run the driver but don't do any actual fencing#vxfen_mode=customized# vxfen_mechanism determines the mechanism for customized I/O# fencing that should be used.## available options:# cps - use a coordination point server with optional script# controlled scsi3 disks#vxfen_mechanism=cps## scsi3_disk_policy determines the way in which I/O Fencing# communicates with the coordination disks. This field is required# only if customized coordinator disks are being used.## available options:# dmp - use dynamic multipathing# raw - connect to disks using the native interface#

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!