Veritas Storage Foundation and High Availability Solutions Release Notes

About Veritas Storage Foundation and High Availability SolutionsKnown issues43Workaround:You must unfreeze the service groups manually after the upgrade completes.To unfreeze the service groups manually1 List all the frozen service groups# hagrp -list Frozen=12 Unfreeze all the frozen service groups:# haconf -makerw# hagrp -unfreeze service_group -persistent# haconf -dump -makeroFlash Archive installation not supported if the target system'sroot disk is encapsulatedSymantec does not support SF installation using Flash Archive if the targetsystem's root disk is encapsulated.Make sure that the target system's root disk is unencapsulated before startingthe installation.After a locale change restart the vxconfig daemon (2417547)You need to restart the vxconfig daemon you change the locale of nodes that useit. The vxconfig daemon starts at boot. If you have changed locale, you need torestart the daemon.Workaround: Refer to the Veritas Storage Foundation Cluster File System HighAvailability Administrator's Guide for the section, "vxconfigd daemon recovery."After performing a manual rolling upgrade, make sure the CVMis online on all nodes without errors (2595441)Make sure that the CVM is online on all nodes without errors after you performthe first phase of a manual rolling upgrade. The CVM protocol version will notupgrade successfully on the nodes where CVM is offline or has errors.If the CVM protocol version does note upgrade successfully, upgrade the CVMprotocol on the CVM master node.