Veritas Storage Foundation and High Availability Solutions Release Notes

Upgrading to 6.0.3Upgrading to 6.0.31896 Take all the VCS service groups offline:# hagrp -offline grp_name -sys sys_name7 Unmount all the VxFS file system which is not under VCS control.# mount -v |grep vxfs# fuser -c /mount_point# umount /mount_pointMake sure that no processes are running which make use of mounted sharedfile system or shared volumes.# fuser -cu /mount_pointPerforming a rolling upgrade on kernel packages for SFRAC: phase 1Note that in the following instructions that a sub-cluster can represent one ormore nodes in a full cluster, but is represented by nodeA.To perform the rolling upgrade on kernel packages: phase 11 On the first subcluster, start the installer for the rolling upgrade with the-rollingupgrade_phase1 option.# ./installmr -rollingupgrade_phase1 nodeA2 Note that if the boot disk is encapsulated, then you do not need to performan unencapsulation for upgrades.3 The installer checks system communications, release compatibility, versioninformation, and lists the cluster name, ID, and cluster nodes. Type y tocontinue.4 The installer inventories the running service groups and determines the nodeor nodes to upgrade in phase 1 of the rolling upgrade. Type y to continue. Ifyou choose to specify the nodes, type n and enter the names of the nodes.5 The installer performs further prechecks on the nodes in the cluster and maypresent warnings. You can type y to continue or quit the installer and addressthe precheck's warnings.6 After the installer shows the package list, it detects if there are online failoverservice groups on the nodes to be upgraded. If there are online failover servicegroups, the installer prompts you to do one of the following:■Manually switch service groups