Veritas Storage Foundation and High Availability Solutions Release Notes

174Upgrading to 6.0.3Upgrading to 6.0.39 If required, apply the OS kernel patches.See “System requirements” on page 26.See Oracle’s documentation for the procedures.10 From the directory that contains the extracted and untarred 6.0.3 rollingpatch binaries, change to the directory that contains the installmr script. Ifssh key authentication is configured then enter:# ./installmr node1 node2If ssh is not configured then enter:# ./installmr -rsh node1 node2where node1 and node2 are nodes which are to be upgraded.11 After the entire cluster is upgraded, follow the installer instructions to proceedfurther.12 If necessary, reinstate any missing mount points in the /etc/vfstab file oneach node.13 Manually mount the VxFS and CFS file systems that are not managed by VCS.14 Start all applications on the cluster that are not configured under VCS. Usenative application commands to start the application.15 Relink the SF Oracle RAC libraries with Oracle.Refer to Veritas Storage Foundation for OracleRAC 6.0.1 or later Installationand Configuration Guide for more information.16 From any node in the cluster, make the VCS configuration writable:# haconf -makerw17 Enter the following command on each node to unfreeze HA service groupoperations:# hasys -unfreeze -persistent nodename18 Make the configuration read-only:# haconf -dump -makero19 Enter the following command on each node to take service groups online:# hagrp -online service_group -sys nodename