Veritas Cluster Server 安 装 指 南

248手 动 配 置 集 群 以 确 保 数 据 完 整 性在 虚 拟 环 境 中 手 动 设 置 非 SCSI-3 防 护# # is the serial number of the CPS as a coordination point; must# start with 1.# # is the virtual IP address of the CPS, must be specified in# square brackets ("[]").# # is the virtual hostname of the CPS, must be specified in square# brackets ("[]").# # is the port number bound to a particular of the CPS.# It is optional to specify a . However, if specified, it# must follow a colon (":") after . If not specified, the# colon (":") must not exist after .## For all the s which do not have a specified , a# default port can be specified as follows:## port=## Where is applicable to all the s for# which a is not specified. In other words, specifying # with a overrides the for that .# If the is not specified, and there are s for# which is not specified, then port number 14250 will be used# for such s.## Example of specifying CP Servers to be used as coordination points:# port=57777# cps1=[192.168.0.23],[192.168.0.24]:58888,[cps1.company.com]# cps2=[192.168.0.25]# cps3=[cps2.company.com]:59999## In the above example,# - port 58888 will be used for vip [192.168.0.24]# - port 59999 will be used for vhn [cps2.company.com], and# - default port 57777 will be used for all remaining s:# [192.168.0.23]# [cps1.company.com]# [192.168.0.25]# - if default port 57777 were not specified, port 14250 would be used# for all remaining s:# [192.168.0.23]