Veritas Cluster Server 安 装 指 南
Veritas⢠Cluster Server å®è£ æå: Linux - Symantec Veritas⢠Cluster Server å®è£ æå: Linux - Symantec
238手 动 配 置 集 群 以 确 保 数 据 完 整 性手 动 设 置 基 于 服 务 器 的 I/O 防 护# vxfen_mechanism determines the mechanism for customized I/O# fencing that should be used.## available options:# cps - use a coordination point server with optional script# controlled scsi3 disks# security - 1# security - 0vxfen_mechanism=cps## scsi3_disk_policy determines the way in which I/O Fencing# communicates with the coordination disks. This field is# required only if customized coordinator disks are being used.## available options:# dmp - use dynamic multipathing# raw - connect to disks using the native interface#scsi3_disk_policy=dmp# security when enabled uses secure communication to the cp server# using VxAT (Veritas Authentication Service)# available options:# 0 - don't use Veritas Authentication Service for cp server# communication# 1 - use Veritas Authentication Service for cp server# communicationsecurity=1## Specify 3 or more odd number of coordination points in this file,# one in its own line. They can be all-CP servers, all-SCSI-3# compliant coordinator disks, or a combination of CP servers and# SCSI-3 compliant coordinator disks. Please ensure that the CP# server coordination points are numbered sequentially and in the# same order on all the cluster nodes.## Coordination Point Server(CPS) is specified as:## cps=[]:
手 动 配 置 集 群 以 确 保 数 据 完 整 性手 动 设 置 基 于 服 务 器 的 I/O 防 护239## If a CPS supports multiple virtual IPs or virtual hostnames over# different subnets, all of the IPs/names can be specified in a# comma separated list as follows:## cps=[]:,[]:,...,# []:## Where,# # is the serial number of the CPS as a coordination point; must# start with 1.# # is the virtual IP address of the CPS, must be specified in# square brackets ("[]").# # is the virtual hostname of the CPS, must be specified in square# brackets ("[]").# # is the port number bound to a particular of the CPS.# It is optional to specify a . However, if specified, it# must follow a colon (":") after . If not specified, the# colon (":") must not exist after .## For all the s which do not have a specified , a# default port can be specified as follows:## port=## Where is applicable to all the s for# which a is not specified. In other words, specifying # with a overrides the for that .# If the is not specified, and there are s for# which is not specified, then port number 14250 will be used# for such s.## Example of specifying CP Servers to be used as coordination points:# port=57777# cps1=[192.168.0.23],[192.168.0.24]:58888,[cps1.company.com]# cps2=[192.168.0.25]# cps3=[cps2.company.com]:59999## In the above example,
- Page 187 and 188: 执 行 自 动 VCS 配 置用 于
- Page 189 and 190: 执 行 自 动 VCS 配 置配 置
- Page 191 and 192: 14使 用 响 应 文 件 执 行
- Page 193 and 194: 使 用 响 应 文 件 执 行 自
- Page 195 and 196: 使 用 响 应 文 件 执 行 自
- Page 197 and 198: 使 用 响 应 文 件 执 行 自
- Page 199 and 200: 部 分6手 动 安 装■■■■
- Page 201 and 202: 15执 行 安 装 前 任 务本
- Page 203 and 204: 16手 动 安 装 VCS本 章 节
- Page 205 and 206: 手 动 安 装 VCS手 动 安 装
- Page 207 and 208: 手 动 安 装 VCS手 动 安 装
- Page 209 and 210: 手 动 安 装 VCS使 用 Kickstar
- Page 211 and 212: 手 动 安 装 VCS使 用 Kickstar
- Page 213 and 214: 手 动 安 装 VCS使 用 yum 安
- Page 215 and 216: 手 动 安 装 VCS使 用 yum 安
- Page 217 and 218: 手 动 安 装 VCS使 用 yum 安
- Page 219 and 220: 17手 动 配 置 VCS本 章 节
- Page 221 and 222: 手 动 配 置 VCS手 动 配 置
- Page 223 and 224: 手 动 配 置 VCS手 动 配 置
- Page 225 and 226: 手 动 配 置 VCS手 动 配 置
- Page 227 and 228: 18手 动 配 置 集 群 以 确
- Page 229 and 230: 手 动 配 置 集 群 以 确 保
- Page 231 and 232: 手 动 配 置 集 群 以 确 保
- Page 233 and 234: 手 动 配 置 集 群 以 确 保
- Page 235 and 236: 手 动 配 置 集 群 以 确 保
- Page 237: 手 动 配 置 集 群 以 确 保
- Page 241 and 242: 手 动 配 置 集 群 以 确 保
- Page 243 and 244: 手 动 配 置 集 群 以 确 保
- Page 245 and 246: 手 动 配 置 集 群 以 确 保
- Page 247 and 248: 手 动 配 置 集 群 以 确 保
- Page 249 and 250: 手 动 配 置 集 群 以 确 保
- Page 251 and 252: 部 分7升 级 VCS■■■■■1
- Page 253 and 254: 19计 划 升 级 VCS本 章 节
- Page 255 and 256: 计 划 升 级 VCSVCS 支 持 的
- Page 257 and 258: 计 划 升 级 VCS将 安 全 VCS
- Page 259 and 260: 20使 用 安 装 程 序 执 行
- Page 261 and 262: 使 用 安 装 程 序 执 行 典
- Page 263 and 264: 21执 行 VCS 分 阶 段 升 级
- Page 265 and 266: 执 行 VCS 分 阶 段 升 级执
- Page 267 and 268: 执 行 VCS 分 阶 段 升 级执
- Page 269 and 270: 执 行 VCS 分 阶 段 升 级执
- Page 271 and 272: 执 行 VCS 分 阶 段 升 级执
- Page 273 and 274: 执 行 VCS 分 阶 段 升 级执
- Page 275 and 276: 执 行 VCS 分 阶 段 升 级执
- Page 277 and 278: 执 行 VCS 分 阶 段 升 级执
- Page 279 and 280: 执 行 VCS 分 阶 段 升 级执
- Page 281 and 282: 22使 用 响 应 文 件 执 行
- Page 283 and 284: 使 用 响 应 文 件 执 行 自
- Page 285 and 286: 23执 行 滚 动 升 级本 章
- Page 287 and 288: 执 行 滚 动 升 级关 于 滚
238手 动 配 置 集 群 以 确 保 数 据 完 整 性手 动 设 置 基 于 服 务 器 的 I/O 防 护# vxfen_mechanism determines the mechanism for customized I/O# fencing that should be used.## available options:# cps - use a coordination point server with optional script# controlled scsi3 disks# security - 1# security - 0vxfen_mechanism=cps## scsi3_disk_policy determines the way in which I/O Fencing# communicates with the coordination disks. This field is# required only if customized coordinator disks are being used.## available options:# dmp - use dynamic multipathing# raw - connect to disks using the native interface#scsi3_disk_policy=dmp# security when enabled uses secure communication to the cp server# using VxAT (<strong>Veritas</strong> Authentication Service)# available options:# 0 - don't use <strong>Veritas</strong> Authentication Service for cp server# communication# 1 - use <strong>Veritas</strong> Authentication Service for cp server# communicationsecurity=1## Specify 3 or more odd number of coordination points in this file,# one in its own line. They can be all-CP servers, all-SCSI-3# compliant coordinator disks, or a combination of CP servers and# SCSI-3 compliant coordinator disks. Please ensure that the CP# server coordination points are numbered sequentially and in the# same order on all the cluster nodes.## Coordination Point <strong>Server</strong>(CPS) is specified as:## cps=[]: