Veritas Cluster Server Bundled Agents Reference Guide

190
Troubleshooting bundled agents
Troubleshooting network agents
IP agent error messages
Recommended Action: Contact Symantec Technical Support.
TCP/IP is not enabled for adapter (Adapter_Name)
TCP/IP is not enabled for the specified adapter.
Recommended Action: Enable TCP/IP for the adapter.
Error percentage exceeded for (Adapter_name)
The adapter has exceeded the error percentage for sending packets, specified in
the MaxTxErrorPercentage attribute.
Recommended Action: Contact Symantec Technical Support.
Error percentage exceeded limit
The adapter has exceeded the error percentage, specified by
MaxTxErrorPercentage, by the number of times specified in MaxTxErrInterval
attribute.
Recommended Action: Contact Symantec Technical Support.
Initialization failed
The agent failed to retrieve network information. This is a VCS internal error.
Recommended Action: Contact Symantec Technical Support.
Invalid attributes
Invalid values specified for the agent attributes.
Recommended Action: Verify the attributes defined in the configuration file are
assigned a correct value.
Invalid MacAddress format
Incorrect format for MAC Address specified in the MACAddress attribute.
Recommended Action: Verify the MAC Address is in the format AA-BB-CC-DD.
Invalid IP format
Incorrect format for IP address specified in the Address attribute.
Recommended Action: Verify the IP address is in the correct format.
Ping failed for IP (IP_Address)
The agent failed to ping the specified IP address.
Recommended Action: Verify the specified IP address exists in the network. Check
the network connections if the problem persists.