Veritas Cluster Server Bundled Agents Reference Guide
Veritas⢠Cluster Server Bundled Agents Reference Guide - Symantec
Veritas⢠Cluster Server Bundled Agents Reference Guide - Symantec
- No tags were found...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
VCS hardware replication agent for NetApp<br />
NetApp SnapDrive agent<br />
163<br />
Sample configuration<br />
NetAppFiler A2-NetAppFiler (<br />
FilerName = winvm-netapp02<br />
StorageIP = "10.121.57.8"<br />
)<br />
NetApp SnapDrive agent<br />
The NetApp SnapDrive agent monitors, connects, and disconnects filer volumes.<br />
The agent can be configured to use the iSCSI or the FC protocol.<br />
NetApp SnapDrive agent is configured as a resource of type NetAppSnapDrive.<br />
Dependency<br />
The NetApp SnapDrive resource depends on the NetApp SnapMirror and the<br />
NetApp Filer resources for operation.<br />
If the NetApp SnapMirror resource is not configured, the NetApp SnapDrive<br />
resource depends on the NetApp Filer resource.<br />
Agent functions<br />
Online<br />
Offline<br />
Monitor<br />
Open<br />
Clean<br />
Connects a virtual disk (LUN) using an iSCSI or an FC initiator. The agent<br />
presents the LUN as a locally-attached drive to the host. The agent also<br />
removes LUN-host mappings made before the online operation.<br />
Disconnects the virtual disk (LUN) from the host.<br />
Verifies that the specified virtual disk (LUN) is connected to the host.<br />
Verifies that there is connectivitiy to the filer. It also checks that the VCS<br />
Helper service is running with the same privileges as the SnapDrive service.<br />
Attempts to forcibly disconnect a virtual disk (LUN).<br />
Resource type definition<br />
type NetAppSnapDrive (<br />
static int MonitorInterval = 30<br />
static int NumThreads = 1<br />
static i18nstr ArgList[] = { FilerResName,<br />
"FilerResName:FilerName", "FilerResName:StorageIP",