INSTRUCTIONS

22EDIT ControlThis is the primary edit control for the effects. It generally controlsMix level or time/rate depending on the effects selected. (See Effectsedit notes)20 21 22 23 24A Edit Button21Press and hold for1second and then turn EDIT to adjustparameters in the Effects bank. (See Effects edit notes)22B Edit Button23Press and hold for1second and then turn(See Effects edit notes)22EDIT to adjust more parameters in the Effects bank.24BYPASS ButtonWhen pressed momentarily will turn off the Effects.Press and hold for1second and then turn422EDIT, allow further effects parameter edits. (See Effects edit notes)BOOST ButtonWhen pressed applies a gain boost at the front of the preamplifier (similar to a foot pedal boost)The amount of boost can be adjusted and stored to each AMP sound. This is done by press and hold then adjust the EDITcontrol to alter the amount of boost. May also be switched on and off via optional remote footswitch. (See also Boost storing)Rotary control LightsIn LIVE mode the lights will show the pointer positions of all the controls.In HERO and CHANNELl mode the lights will show the positions used to create the sound within the HERO and CHANNELmodes. This makes it easier to see how the sounds were made and any editing you may wish to do.19