Koroseal Wall Protection Systems Korogard CH20 Chair Rail

Koroseal Wall Protection SystemsKorogard ® CH20 Chair RailThe KOROGARD CH20 Chair Rail is a 2-1/8" (54mm) high rail with a full-length vinyl cover and economical PVCretainer. Chair Rails create a damage-resistant barrier to reckless traffic. The CH20 Chair Rail combines a simple designelement with economical construction to meet those special wall protection needs. KOROGARD ruggeddurability makes the CH20 Chair Rail best suited for lighter-impact areas.The KOROGARD CH20 Chair Rail is backed by a limited five-year warranty. All KOROGARD ChairRails are Class I/A fire rated and meet national building code standards. All KOROGARD linear profilescolor-coordinate with a multitude of KOROSEAL ® Wallcoverings for a systems approach to wall protection.For more information on KOROGARD Chair Rails or the KOROSEAL Wall Protection System, please call yourlocal KOROGARD distributor or 800-628-0449.CH20CH01ACCESSORY ITEMSStandard End CapKorogard GuardFastener(By Others)2-1/8"(54mm)1-1/8"(28.6mm)PVC RetainerCH20

Product Guide SpecificationSECTION 10 26 00BUMPER GUARDSPART 1 GENERAL1.01 SECTION INCLUDES2-1/8" (54mm) Chair Rail.1.02 SUBMITTALSA. Comply with requirements of Section 01 33 00—Submittals.B. Product Data: Submit manufacturer’s product data.C. Shop Drawings: Submit shop drawings showingcomponents, dimensions, and anchorage details.D. Samples: Submit 12" (304.8mm) long sample of each modeland color specified, including end caps and corner units,for Architect’s approval.E. Certification: Submit manufacturer’s certificationindicating compliance with ADA requirements.1.03 QUALITY ASSURANCEComply with NFPA 101 ® for interior finish materials.Smoke developed less than 450 and flame spreadof 25 or less in accordance with ASTM E 84.1.04 DELIVERY, STORAGE, AND HANDLINGA. Delivery: Deliver materials to site in manufacturer’s original,unopened containers and packaging with labels clearlyindicating manufacturer and material.B. Storage: Store materials indoors in a clean, dry areaprotected from damage and in accordance withmanufacturer’s instructions.C. Handling: Protect materials during handling andinstallation to prevent damage.PART 2 PRODUCTS2.01 MANUFACTURERKoroseal Wall Protection Systems,A Division of RJF International Corporation.2.02 BUMPER GUARDSKoroseal “Korogard” CH20 Chair Rail. ChairRail mounted over continuous PVC retainer.Exposed surfaces shall be free of wrinkling,chipping, discoloration, or other imperfections.1. Dimensions:a. Height: 2-1/8" (54mm).b. Width: 1-1/8" (28.6mm).c. Clearance from Wall: Flush with wall.2. Profile: High-impact vinyl acrylic profile locked in place,nominal 0.060" (1.5mm) thick. Class I/A fire rating,tested in accordance with ASTM E 84.3. Profile Finish: Pebble grain.4. Retainer: Continuous PVC retainer along entire lengthof Chair Rail, minimum 0.080" (2mm) thick.5. End Caps: Color and texture similar to that of rail.PART 3 EXECUTION3.01 EXAMINATIONInspect wall surfaces to receive Chair Rail. Notify theArchitect in writing if wall surfaces are not acceptable.Do not begin installation until unacceptable conditionshave been corrected.3.02 INSTALLATIONA. Install Chair Rails to walls securely in accordancewith manufacturer’s written instructions.B. Install Chair Rails accurately in location, alignment,and elevation.C. Provide horizontal steel stud back-up in drywall studcavity to accept fasteners.800-628-0449 • www.korogard.com • Division 10 26 002588CH20S1111-04® is a registered trademark of RJF International Corporation.NFPA 101 ® is a registered trademark of the National Fire Protection Association.