å å - HellermannTyton
å å - HellermannTyton
å å - HellermannTyton
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Dual Swivel Saddle Spacer<br />
DSWS4<br />
Features and Benefits<br />
These saddle spacers are installed between<br />
two bundles (such as wires, cables, hoses,<br />
tubing, conduit, etc.) to separate them and<br />
prevent chafing and wear. The mounts can<br />
be easily rotated by hand, allowing the bundles<br />
to be crossed and rotated at any angle.<br />
Cable ties, which secure the bundles, are<br />
used with the mounts. The dual swivel saddle<br />
spacers accommodate cable ties up to<br />
12.7 mm wide.<br />
The “H” profile of the saddles allows for<br />
broad surface contact with the bundle, minimizing<br />
pinching and crushing of the bundle.<br />
The mounts are designed to accommodate<br />
a wide range of bundle diameters.<br />
The DSWS4 Dual Swivel Saddle Spacer<br />
seperates the two bundles by 23.6 mm<br />
whilst the DSWS4 provides a 17.8 mm<br />
separation between bundles.<br />
This product is designed for use with<br />
<strong>HellermannTyton</strong>'s T50 - T250 Series cable<br />
ties.<br />
Application<br />
Primarily designed for use in the automotive/truck<br />
industry, these parts can be used<br />
in a wide variety of industries and applications<br />
where bundles need separation from<br />
each other combined with the necessary<br />
functionality to support moving harnesses.<br />
Technical Table<br />
DSWS4, DSWS5.<br />
Material Data<br />
Material Polyacetal (POM)<br />
Operating<br />
Temperature<br />
Material Data<br />
-40 °C to +85 °C<br />
Flammability UL94 HB<br />
Material Polyamide 6.6 heatstabilised (PA66HS)<br />
Operating<br />
Temperature<br />
Flammability UL94 V2<br />
-40 °C to +105 °C continuous,<br />
(+145 °C for 500 h)<br />
Length Width Height Bundle Ø Bundle Ø<br />
Special<br />
Article-No. Type (L) (W) (H) min. max. Material Colour Features<br />
151-06500 DSWS4 23.6 20.3 18 6.0 76.0 PA66HS, POM Black (BK) 2<br />
All dimensions in mm. Subject to technical changes.<br />
Cable Ties and Fixings<br />
Fixing Elements 1.4<br />
�<br />
�<br />
swivels<br />
71
1.4<br />
72<br />
Cable Ties and Fixings<br />
Fixing Elements<br />
Dual Swivel Saddle Mounts<br />
DSWS5<br />
Features and Benefits<br />
These saddle spacers are installed between<br />
two bundles (such as wires, cables, hoses,<br />
tubing, conduit, etc.) to separate them and<br />
prevent chafing and wear. The spacers can<br />
be easily rotated by hand, allowing the bundles<br />
to be crossed and rotated at any angle.<br />
Cable ties, which secure the bundles, are<br />
used with the spacers.<br />
The DSWS5 accepts bundle diameters ranging<br />
from 16mm to 152mm and provides a<br />
23.6 mm separation between bundles. The<br />
dual swivel saddle spacers accommodate<br />
cable ties up to 12.7mm wide.<br />
Application<br />
Primarily designed for use in the automotive/<br />
truck industry, these parts can be used<br />
in a wide variety of industries and applications<br />
where bundles need separation from<br />
each other.<br />
Technical Table<br />
Article-No. Type<br />
Length<br />
(L)<br />
swivels<br />
Width<br />
(W)<br />
Height<br />
(H)<br />
The spacers can be easily rotated by hand, allowing the bundles to be crossed and rotated at any angle.<br />
Material Data<br />
DSWS5<br />
Material Polyamide 6.6 heatstabilised (PA66HS)<br />
Operating<br />
Temperature<br />
Bundle Ø<br />
min.<br />
Flammability UL94 V2<br />
Bundle Ø<br />
max.<br />
-40 °C to +105 °C continuous<br />
�<br />
Min. Extraction Force<br />
(N) Material Colour<br />
151-06502 DSWS5 40.6 25.4 23.6 16.0 152 1112 PA66HS Black (BK) 2<br />
All dimensions in mm. Subject to technical changes.<br />
Special<br />
Features
Heavy Duty Mounts<br />
Features and Benefits<br />
The heavy-duty mount, when used with a<br />
cable tie, eliminates the need to carry multiple<br />
sizes of fixed bundle diameter clamps,<br />
which reduces inventory and purchasing<br />
costs while simplifying the assembly process.<br />
The mount and cable tie combination<br />
makes it easy to service bundles in the field.<br />
Simply remove the cable tie, leave the<br />
mount in place, and replace the cable tie.<br />
They contain a small tab inside the mounting<br />
hole to temporarily engage the threads,<br />
which allows assemblers to pre-install the<br />
mount on a stud before securing with a<br />
washer and a nut.<br />
The arched ″H″ profile of the saddle surface<br />
allows for a broad surface contact with the<br />
bundle, minimizing pinching and crushing<br />
of the bundles, and adjusts to a wide variety<br />
of bundle diameters.<br />
The heavy-duty mounts are designed for use<br />
with <strong>HellermannTyton</strong>’s heavy duty T250,<br />
T255 and wide strap cable ties to harness<br />
wires and hoses.<br />
Application<br />
Primarily designed for use in the automotive/truck<br />
industry, these parts can be used<br />
in a wide variety of industries and applications<br />
where bundles need mounting.<br />
Standard Torque Mounts<br />
Technical Table<br />
Article-No. Type<br />
Length<br />
(L)<br />
Width<br />
(W)<br />
Height<br />
(H)<br />
Fixing Hole Ø<br />
(FH)<br />
Strap Width<br />
max. (G) Material Colour<br />
Special<br />
Features<br />
151-00134 HDM19 36.32 19.3 16.7 4.7 12.7 PA66HIR Black (BK) 2<br />
151-00437 HDM25 36.32 19.3 16.7 6.3 12.7 PA66HIR Black (BK) 2<br />
151-00439 HDM312 36.32 19.3 16.7 7.8 12.7 PA66HIR Black (BK) 2<br />
All dimensions in mm. Subject to technical changes.<br />
Medium Torque Mounts<br />
Technical Table<br />
Article-No. Type<br />
Length<br />
(L)<br />
Width<br />
(W)<br />
Fixing Hole Ø<br />
(FH)<br />
Strap Width<br />
max. (G) Material Colour<br />
Special<br />
Features<br />
151-00441 HDM321 46 24.0 8.0 12.7 PA66HIR Black (BK) 2<br />
151-00442 HDM401 46 24.0 9.5 12.7 PA66HIR Black (BK) 2<br />
151-00443 HDM501 46 24.0 12.7 12.7 PA66HIR Black (BK) 2<br />
All dimensions in mm. Subject to technical changes.<br />
U.S. Patent Number 5,820,083<br />
Material Data<br />
Material Polyamide 6.6 high impact modified<br />
(PA66HIR)<br />
Operating<br />
Temperature<br />
Flammability UL94 HB<br />
-40 °C to +80 °C continuous,<br />
(+105 °C for 500 h)<br />
Cable Ties and Fixings<br />
Fixing Elements 1.4<br />
�<br />
Standard Torque Mounts<br />
Medium Torque Mounts<br />
73
1.4<br />
74<br />
Cable Ties and Fixings<br />
Fixing Elements<br />
High Torque Mounts<br />
Features and Benefits<br />
This mount is designed for use with powerassisted<br />
impact wrenches and is moulded<br />
with a metal bushing to withstand the forces<br />
required to tighten high torque bolts. The<br />
high torque double mount secures the bundle<br />
directly over the mounting fastener. The<br />
cable ties are held in place during assembly<br />
with friction tabs inside the cable tie slots.<br />
The mount and cable tie combination makes<br />
it easy to service bundles in the field. Simply<br />
remove the cable tie, leave the mount in<br />
place, and replace the cable tie.<br />
The arched ″H″ profile of the saddle surface<br />
allows for a broad surface contact with the<br />
bundle, minimizing pinching and crushing of<br />
the bundles, and accommodates a wide variety<br />
of bundle diameters.<br />
Application<br />
Primarily designed for use in the automotive/truck<br />
industry, these parts can be used<br />
in a wide variety of industries and applications<br />
where bundles need mounting.<br />
Technical Table<br />
Article-No. Type<br />
Length<br />
(L)<br />
Width<br />
(W)<br />
Fixing Hole Ø<br />
(FH)<br />
Strap Width<br />
max. (G) Material Colour<br />
Special<br />
Features<br />
151-00444 HDM320 47 25.0 8.0 12.7 PA66HIRHS Black (BK) 2<br />
151-00445 HDM400 47 25.0 9.5 12.7 PA66HIRHS Black (BK) 2<br />
151-00446 HDM500 47 25.0 12.7 12.7 PA66HIRHS Black (BK) 2<br />
All dimensions in mm. Subject to technical changes.<br />
High Torque Double Mount<br />
High Torque Double Mounts<br />
Technical Table<br />
Article-No. Type<br />
Length<br />
(L)<br />
Width<br />
(W)<br />
Fixing Hole Ø<br />
(FH)<br />
Strap Width<br />
max. (G) Material Colour<br />
Special<br />
Features<br />
151-00456 HDM375BDM 87 34.5 9.5 12.7 PA66HIRHS Black (BK) 2<br />
All dimensions in mm. Subject to technical changes.<br />
Material Data<br />
Material Polyamide 6.6 high impact modified,<br />
heatstabilised (PA66HIRHS)<br />
Operating<br />
Temperature<br />
Flammability UL94 HB<br />
-40 °C to +105 °C<br />
�<br />
High Torque Mounts
Two Way Saddle Mounts<br />
Features and Benefits<br />
This saddle mount is installed between two<br />
bundles (such as wires, cables, hoses, tubing,<br />
conduit, etc.) to separate them and prevent<br />
chafing and wear. Fastened to a frame<br />
rail or mounting bracket, the “H” profile on<br />
the saddle mount provides a tight circumferential<br />
loop on large and small bundles.<br />
The two-way saddle mount accommodates<br />
<strong>HellermannTyton</strong> cable ties up to a width of<br />
12.7mm (T50-T250).<br />
The S2HM25 incorporates a hexagonal<br />
retention feature that captures a bolt or nut.<br />
This will require tool access from back side<br />
of the panel only.<br />
With the S2CM25 a socket counter bore<br />
allows securing with a socket wrench from<br />
the topside for use with a weld stud or bolt.<br />
Application<br />
With its heavy duty fixing ability this product<br />
offers excellent performance for the truck,<br />
ship and construction vehicle industries.<br />
Two Way Saddle Mounts<br />
S2CM25 S2HM25<br />
Technical Table<br />
Article-No. Type<br />
Length<br />
(L)<br />
Width<br />
(W)<br />
Height<br />
(H)<br />
Fixing Hole Ø<br />
(FH)<br />
Bundle Ø<br />
max. Material Colour<br />
(each side)<br />
151-29403 S2HM25 45 30.0 23 6.0 89.0 PA66HIRHS Black (BK) 2<br />
151-29400 S2CM25 45 30.0 23 6.0 89.0 PA66HIRHS Grey (GY) 2<br />
All dimensions in mm. Subject to technical changes.<br />
Material Polyamide 6.6 high impact modified,<br />
heatstabilised (PA66HIRHS)<br />
Operating<br />
Temperature<br />
Flammability UL94 HB<br />
-40 °C to +105 °C<br />
Two Way Saddle Mounts<br />
Cable Ties and Fixings<br />
Fixing Elements 1.4<br />
This saddle mount is installed between two bundles to separate them and prevent chafing and wear.<br />
Material Data<br />
Special<br />
Features<br />
�<br />
75
1.4<br />
76<br />
Cable Ties and Fixings<br />
Fixing Elements<br />
Saddle Mount For The Button<br />
Head Tie<br />
Features and Benefits<br />
This saddle mount is designed for the use<br />
with <strong>HellermannTyton</strong>’s button head ties.<br />
The saddle mount stands off bundles from<br />
frame rails, providing clearance from bolts<br />
and other protrusions for protection against<br />
abrasion. This mount also allows the flowthrough<br />
of salt, dirt and other impurities<br />
from the road, preventing unwanted buildup<br />
on hoses and harnesses.<br />
The tie is snapped into the mount which<br />
allows the strap and tie assembly to be preinstalled<br />
on the frame rail or panel. The<br />
mount can secure three separate bundles,<br />
providing parallel spacing between the<br />
frame rail and adjacent bundles.<br />
The saddle mount is manufactured with a<br />
pilot bushing which prevents the cable tie<br />
from chafing against the burr edge of the<br />
mounting hole.<br />
Application<br />
With its heavy duty fixing ability this product<br />
offers excellent performance for the truck,<br />
ship and construction vehicle industries.<br />
Saddle Mount.<br />
Technical Table<br />
Article-No. Type<br />
Length<br />
(L)<br />
Width<br />
(W)<br />
Height<br />
(H)<br />
This saddle mount is designed for the use with <strong>HellermannTyton</strong>’s button head ties.<br />
This saddle mount is designed for the use with <strong>HellermannTyton</strong>’s button<br />
head ties.<br />
Material Data<br />
Material Polyamide 6.6 high impact modified,<br />
heatstabilised (PA66HIRHS)<br />
Operating<br />
Temperature<br />
Flammability UL94 HB<br />
Height<br />
(H2)<br />
Fixing Hole Ø<br />
(FH)<br />
-40 °C to +105 °C continuous<br />
Panel Thickness<br />
min.<br />
min. max. (side) (center)<br />
Bundle Ø<br />
max. Material Colour<br />
151-29301 MSBT120 48.3 16.5 20.6 22.2 11.2 20.8 4.1 25.4 152.4 PA66HIRHS Black (BK) 2<br />
All dimensions in mm. Subject to technical changes.<br />
�<br />
Special<br />
Features
Fir Tree Saddle Mounts<br />
Features and Benefits<br />
The saddle mounts act as a standoff, elevating<br />
bundles above bolt protrusions commonly<br />
found in frame rails and panels. The incorporated<br />
Fir tree anchor will be pushed into a<br />
punched hole of the panel and secures a stable<br />
and safe fixation.<br />
A tension tab on the mount allows able ties<br />
to be pre-assembled in a ready position prior<br />
to bundles being brought to the mount. The<br />
mount can secure up to 4 separate bundles,<br />
providing parallel spacing between the frame<br />
rail and adjacent bundles.<br />
The fir tree saddle mount accommodates<br />
<strong>HellermannTyton</strong> cable ties up to a width of<br />
12.7mm (T50-T250).<br />
Application<br />
With its heavy duty fixing ability this product<br />
offers excellent performance for the truck,<br />
ship and construction vehicle industries.<br />
Technical Table<br />
Article-No. Type<br />
Length<br />
(L)<br />
Width<br />
(W)<br />
Height<br />
(H)<br />
Fir Tree Saddle Mounts<br />
Cable Ties and Fixings<br />
Fixing Elements 1.4<br />
The mount can secure up to 4 separate bundles, providing parallel spacing between the frame rail and<br />
adjacent bundles.<br />
Material Data<br />
Material Polyamide 6.6 high impact modified,<br />
heatstabilised (PA66HIRHS)<br />
Operating<br />
Temperature<br />
Flammability UL94 HB<br />
Height<br />
(H2)<br />
Fixing<br />
Hole Ø<br />
(FH)<br />
-40 °C to +105 °C<br />
Panel<br />
Thickness<br />
min.<br />
Panel<br />
Thickness<br />
max.<br />
Bundle Ø<br />
max. Material Colour<br />
151-29500 S3STM50 50 22 35 55 12.7 1.9 13.0 127.0 PA66HIRHS Black (BK) 2<br />
All dimensions in mm. Subject to technical changes.<br />
�<br />
Special<br />
Features<br />
77
1.4<br />
78<br />
Cable Ties and Fixings<br />
Fixing Elements<br />
Axial Oval Mounts<br />
Features and Benefits<br />
<strong>HellermannTyton</strong>’s axial oval mounts stand<br />
off bundles from frame rails and cross members<br />
to prevent them from rubbing and<br />
chafing. The bundle will be orientated 90<br />
degrees to the bolt. The axial oval mount<br />
accommodates <strong>HellermannTyton</strong> cable ties<br />
up to a width of 12.7mm (T50-T250).<br />
Application<br />
With its heavy duty fixing ability this product<br />
offers excellent performance for the truck,<br />
ship and construction vehicle industries.<br />
Technical Table<br />
Article-No. Type<br />
Length<br />
(L)<br />
Width<br />
(W)<br />
Height<br />
(H)<br />
Stud<br />
Ø Material Colour<br />
Special<br />
Features<br />
151-29701 SAOM82 34 26 35 8 PA66HIRHS Black (BK) 2<br />
151-29600 SAM83 34 26 35 8 PA66HIRHS Grey (GY) 2<br />
All dimensions in mm. Subject to technical changes.<br />
Axial oval mounts stand off bundles from frame rails and cross members to prevent them from rubbing<br />
and chafing.<br />
Material Data<br />
Material Polyamide 6.6 high impact modified,<br />
heatstabilised (PA66HIRHS)<br />
Operating<br />
Temperature<br />
Flammability UL94 HB<br />
SAOM82<br />
-40 °C to +105 °C<br />
SAM83<br />
�
Cable Guide Standoff<br />
Features and Benefits<br />
This cable guide standoff is designed for the<br />
use with <strong>HellermannTyton</strong>’s button head ties.<br />
The cable guide standoff stands off bundles<br />
from frame rails, providing clearance from<br />
bolts and other protrusions for protection<br />
against abrasion. This mount also allows the<br />
flow-through of salt, dirt and other impurities<br />
from the road, preventing unwanted buildup<br />
on hoses and harnesses. This product<br />
perfectly secures convoluted tubing’s up to<br />
26mm in diameter.<br />
Application<br />
With its heavy duty fixing ability this product<br />
offers excellent performance for the truck,<br />
ship and construction vehicle industries.<br />
This product for use with<br />
the Button Head Ties,<br />
please see page 35.<br />
Technical Table<br />
Article-No. Type<br />
Length<br />
(L)<br />
Width<br />
(W)<br />
Height<br />
(H)<br />
This product perfectly secures convoluted tubing’s up to 26mm in diameter.<br />
Material Polyamide 6.6 high impact modified,<br />
heatstabilised (PA66HIRHS)<br />
Operating<br />
Temperature<br />
Flammability UL94 HB<br />
-40 °C to +105 °C<br />
Cable Guide Standoff Cable Guide Standoff<br />
Bundle Ø<br />
max. Material Colour<br />
Special<br />
Features<br />
151-00006 CGS1 56.6 25.4 30.5 26.0 PA66HIRHSW Black (BK) 2<br />
All dimensions in mm. Subject to technical changes.<br />
Material Data<br />
Cable Ties and Fixings<br />
Fixing Elements 1.4<br />
�<br />
79
1.4<br />
80<br />
Cable Ties and Fixings<br />
Fixing Elements<br />
BundlingClips CHA-Series<br />
Features and Benefits<br />
There are various types of TapeClip available<br />
for winding cables and cable looms. The<br />
cables to be wound are easily fixed to the<br />
winder bar with cable ties or adhesive tape.<br />
The really special thing about the CHA series<br />
is its horizontal length tolerance compensation.<br />
This is of benefit if holes cannot be<br />
drilled to fit perfectly or the cable bundle has<br />
to be routed around corners. The use of the<br />
TCSFT6.5S-CHA-MD with seal is recommended<br />
if drill holes need to be protected against<br />
water ingress.<br />
Bases in a variety of shapes and sizes are<br />
available for all manner of metal thicknesses<br />
and drill hole diameters tailored to meet precise<br />
application requirements.<br />
Application<br />
An easy means of routing and securing<br />
cable sets in various parts of cars.<br />
Material Data Material Data<br />
Material Polyamide 6.6 (PA66)<br />
Operating<br />
Temperature<br />
Flammability UL94 V2<br />
Technical Table<br />
Article-No. Type<br />
-40 °C to +85 °C continuous,<br />
(+105 °C for 500 h)<br />
Length<br />
(L)<br />
Width<br />
(W)<br />
Fixing<br />
Hole Ø<br />
(FH)<br />
Panel<br />
Thickness<br />
min.<br />
Panel<br />
Thickness<br />
max. Colour Material<br />
150-08110 CHA1 54.0 6.0 6.3-7.0 0.5 1.2 Black (BK) PA66HS<br />
150-50197 CHA 1.5 54.0 6.0 6.3-7.0 0.5 1.2 Green (GN) PA66<br />
151-00153 TCSFT6.5SCHAMD 54.0 6.0 6.5-6.7 1.8 0,6 Black (BK) PA66HS 3<br />
151-02901 CHA2 54.0 6.0 6.5-7.0 0.8 2.0 Black (BK) PA66<br />
All dimensions in mm. Subject to technical changes.<br />
The CHA2 with fir tree base and length tolerance compensation for precision cable routing even in difficult<br />
conditions.<br />
halogenfree<br />
�<br />
Material Polyamide 6.6 heatstabilised<br />
(PA66HS)<br />
Operating<br />
Temperature<br />
Flammability UL94 V2<br />
-40 °C to +105 °C continuous,<br />
(+145 °C for 500 h)<br />
halogenfree<br />
Special<br />
Features Drawing<br />
�
BundlingClip with fir tree<br />
Features and Benefits<br />
BundlingClips with fir tree bases are easy to<br />
mount in drill holes and are able to withstand<br />
high extraction forces. The cable bundle<br />
is fastened to the winder bar easily with<br />
cable ties or adhesive tape. Holding tabs prevent<br />
the tie slipping sideways on the cable<br />
bundle.<br />
A special feature of the CHDP66 BundlingClip<br />
is its vertical winder bar, which enables two<br />
cables or cable bundles to be routed in parallel.<br />
BundlingClips with oval fir tree bases feature<br />
anti-twist protection.<br />
Application<br />
Widespread use in cable harness production;<br />
a quick and easy means of fixing cables and<br />
lines securely in various parts of cars.<br />
Material Data<br />
Material Polyamide 6.6 (PA66)<br />
Operating -40 °C to +85 °C continuous,<br />
Temperature (+105 °C for 500 h)<br />
Flammability UL94 V2<br />
Technical Table<br />
Article-No. Type<br />
Length<br />
(L)<br />
Fixing Hole Ø<br />
(FH)<br />
Panel<br />
Thickness<br />
min.<br />
Panel<br />
Thickness<br />
max. Colour Material Drawing<br />
155-30802 TC2FT6LG 55.0 6.3-7.0 0.6 5.1 Black (BK) PA66HIRHS<br />
151-00215 TC4FT6LG 37.0 6.3-7.0 0.6 5.1 Black (BK) PA66HIRHS<br />
151-00467 TC4FT6LG-A 37.0 6.3-7.0 0.6 5.1 Natural (NA) PA66HIRHS<br />
151-00028 TC3FT6S 37.0 6.5-7.0 0.75 1.5 Black (BK) PA66HIRHS<br />
150-95500 TC5FT6S 37.0 6.5-7.0 0.75 1.5 Black (BK) PA66HIRHS<br />
150-07010 CHDP66 40.0 6.6 0.8 4.5 Black (BK) PA66<br />
155-39002 TCDSFT6-HEX 40.0 6.35 0.8 4.5 Black (BK) PA66HIRHS<br />
155-16301 WICKELCLIP-VDS* 40.0 6.3x9.0 0.6 2.5 Black (BK) PA66HIRHS<br />
151-00605 TCOP62x122* 55.0 6.2x12.2 0.6 6.0 Black (BK) PA66HIRHS<br />
151-00029 TCOP70x120* 55.0 7.0x12.0 0.6 6.0 Black (BK) PA66HIRHS<br />
All dimensions in mm. Subject to technical changes.<br />
* for oval hole<br />
Cable Ties and Fixings<br />
Fixing Elements 1.4<br />
BundlingClips with fir tree bases for a variety of applications with a wide range of metal thicknesses and<br />
drill holes.<br />
halogenfree<br />
�<br />
Material Data<br />
Material Polyamide 6.6 high impact modified,<br />
heatstabilised (PA66HIRHS)<br />
Operating<br />
Temperature<br />
Flammability UL94 HB<br />
-40 °C to +105 °C<br />
�<br />
81
1.4<br />
82<br />
Cable Ties and Fixings<br />
Fixing Elements<br />
StandOff Clip with fir tree<br />
Features and Benefits<br />
On these StandOff Clips, the winder bar<br />
and the clamping element are separated by<br />
a plate. Cable bundles and cables are routed<br />
at a set distance from the punched<br />
holes.<br />
Clips with fir tree bases offer the advantage<br />
of very high holding forces/extraction forces,<br />
enabling the cable bundle to be fixed to the<br />
holding plate very securely. Thanks to their<br />
special shape and size, fir tree bases can be<br />
used with an incredibly wide range of sheet<br />
thicknesses.<br />
The winder bar on the COW series features<br />
an integrated cable tape mount. This means<br />
that cable bundles can be attached quickly<br />
and easily with a cable tie.<br />
Technical Table<br />
Article-No. Type<br />
Length<br />
(L)<br />
Length<br />
(L2)<br />
Fixing<br />
Hole Ø<br />
(FH)<br />
Panel<br />
Thickness<br />
min.<br />
Panel<br />
Thickness<br />
max. Colour Material Drawing<br />
151-00077 CH20D6 50 20 6.5 0.8 1.6 Black (BK) PA66HS<br />
151-02600 CH20D7 50 20 7.0 0.8 1.6 Black (BK) PA66<br />
151-03100 COW20DP7 42 20 6.3-7.0 0.8 4.5 Brown (BN) PA66HS<br />
151-03200 COW30DP7 42 30 6.3-7.0 0.8 4.5 Black (BK) PA66<br />
All dimensions in mm. Subject to technical changes.<br />
Cable bundles and cables are routed at a set distance<br />
from the punched holes.<br />
Material Data<br />
Material Polyamide 6.6 (PA66)<br />
Operating -40 °C to +85 °C continuous,<br />
Temperature (+105 °C for 500 h)<br />
Flammability UL94 V2<br />
Material Data<br />
Material Polyamide 6.6 heatstabilised (PA66HS)<br />
Operating -40 °C to +105 °C continuous,<br />
Temperature (+145 °C for 500 h)<br />
Flammability UL94 V2<br />
Cow-Clip combined with cable tie for rapid fastening.<br />
halogenfree<br />
halogenfree<br />
�<br />
�
BundlingClip with/without<br />
arrowhead<br />
Features and Benefits<br />
These clips comprise winder bars with arrowhead<br />
mounts. The arrowhead is easy to mount<br />
in the drill hole. High holding forces make the<br />
connection secure. The SFT6, 5-D16-3 TapeClip<br />
with seal is the ideal solution for drill holes<br />
which need to be protected against the ingress<br />
of moisture.<br />
TapeClips with OmegaClips offer the additional<br />
advantage of being able to accommodate<br />
the addition of individual cables by means of<br />
retrofitting post-installation; these cables can<br />
then run in parallel. This maximises operational<br />
efficiency for example where special<br />
equipment configurations in the automotive<br />
industry involving cable installations are concerned.<br />
Material Data<br />
Material Polyamide 6.6 high impact modified,<br />
heatstabilised (PA66HIRHS)<br />
Operating<br />
Temperature<br />
Flammability UL94 HB<br />
Technical Table<br />
Article-No. Type<br />
-40 °C to +105 °C<br />
Length<br />
(L)<br />
Fixing Hole Ø<br />
(FH)<br />
L to R: TapeClip with OmegaClip, TapeClip with seal, LRJ1 TapeClip.<br />
Panel Thickn.<br />
min.<br />
Cable Ties and Fixings<br />
Material Data<br />
Material Polyamide 6 (PA6)<br />
Operating -40 °C to +85 °C continuous,<br />
Temperature (+105 °C for 500 h)<br />
Flammability UL94 V2<br />
Panel Thickn.<br />
max. Colour Material<br />
151-00431 SFT65D163 55 6.3-6.7 2.3 3.5 Black (BK) PA66HIRHS<br />
155-11601 ANWICKELTEIL 55 6.3-6.7 1.5 3.0 Black (BK) PA66HIRHS 3<br />
151-08101 LRJ1 55.0 6.2-6.7 0.7 2.0 Black (BK) PA6<br />
133-00067 Halter SFT6.5 60 6.3-6.7 0.6 1.5 Black (BK) PA66HIRHS<br />
151-00447 OCTC1 60 – – – Black (BK) PA66HIRHS<br />
All dimensions in mm. Subject to technical changes.<br />
�<br />
Fixing Elements 1.4<br />
halogenfree<br />
Special<br />
Features Drawing<br />
�<br />
83
1.4<br />
84<br />
Cable Ties and Fixings<br />
Fixing Elements<br />
StandOff Clip with arrowhead<br />
Features and Benefits<br />
StandOff Clips with arrowhead mounts take<br />
very little effort to fit. Just a light push and<br />
the mount will click into place securely behind<br />
the fastening plate.<br />
As the plate, the winder bar and the clamping<br />
element are entirely separate elements,<br />
cable looms can be routed at a set distance<br />
from the punched holes. Tabs on the side<br />
of the winder bar ensure that the cable<br />
bundle remains in the correct position during<br />
winding.<br />
Technical Table<br />
Article-No. Type<br />
150-45397<br />
150-45398<br />
STAND OFF<br />
CLIP<br />
STAND OFF<br />
CLIP<br />
Length<br />
(L)<br />
Length<br />
(L2)<br />
StandOff Clips allow cable looms to be routed at a set distance from the punched holes.<br />
Material Data<br />
Fixing<br />
Hole Ø<br />
(FH)<br />
Material Polyamide 6.6 high impact modified,<br />
heatstabilised (PA66HIRHS)<br />
Operating<br />
Temperature<br />
Flammability UL94 HB<br />
Panel<br />
Thickness<br />
min.<br />
-40 °C to +105 °C<br />
Material Data<br />
Material Polyamide 4.6 (PA46)<br />
Operating -40 °C to +150 °C continuous,<br />
Temperature (+195 °C for 500 h)<br />
Flammability UL94 V2<br />
Panel<br />
Thickness<br />
max. Colour Material<br />
40 31 6.5-6.8 0.4 1.6 Black (BK) PA66HIRHS<br />
40 31 6.5-6.8 0.4 1.6 Grey (GY) PA46 1<br />
155-01600 STAND-OFF-<br />
CLIP-2<br />
40 25 6.5-6.8 0.4 1.6 Black (BK) PA66HIRHS<br />
All dimensions in mm. Subject to technical changes.<br />
Limited Fire<br />
Hazard<br />
�<br />
�<br />
Special<br />
Features Drawing
StandOff Clip with fir tree<br />
Features and Benefits<br />
The wide and varied options for routing the<br />
cable set are what set this product range<br />
apart. The separate winding bars at either<br />
end of the clip are very flexible, thereby providing<br />
a perfect match for the cable bundle.<br />
The spacer ensures that cable looms are<br />
guided safely at a set distance from edges<br />
or drill holes.<br />
The fastening is made using the fir tree<br />
base and facilitates use on metals of varying<br />
thicknesses. The high holding forces ensure<br />
that the cable bundle is fastened securely.<br />
Technical Table<br />
Article-No. Type<br />
Length<br />
(L)<br />
Fixing Hole Ø<br />
(FH)<br />
Panel Thickness<br />
min.<br />
Panel Thickness<br />
max. Colour Material Drawing<br />
155-30902 SOC4 M.FT6 55 6.5-7.0 0.7 5.1 Black (BK) PA66HIRHS<br />
151-00074 SOC5FT6LG 55 6.5-7.0 0.7 5.1 Black (BK) PA66HIRHS<br />
151-00023 SOC6 55 6.3-7.0 0.8 3.5 Black (BK) PA66HIRHS<br />
All dimensions in mm. Subject to technical changes.<br />
StandOff Clip SOC4 with fir trree FT6.<br />
Material Data<br />
Material Polyamide 6.6 high impact modified,<br />
heatstabilised (PA66HIRHS)<br />
Operating<br />
Temperature<br />
Flammability UL94 HB<br />
-40 °C to +105 °C<br />
Cable Ties and Fixings<br />
Fixing Elements 1.4<br />
�<br />
85
1.4<br />
86<br />
Cable Ties and Fixings<br />
Fixing Elements<br />
BundlingClip with weld stud clip<br />
Features and Benefits<br />
TapeClips with a variety of types of clip have<br />
been designed for winding cables and cable<br />
looms. The cables to be wound are easily<br />
fixed to the winder bar with cable ties or<br />
adhesive tape.<br />
This is followed by simple mounting on a<br />
weld stud. Unlike a round clip, the weld stud<br />
benefits from length tolerance compensation<br />
of up to 4 mm.<br />
Other applications include the connection of<br />
connector clips or OmegaClips, both of which<br />
support the subsequent addition and parallel<br />
running of individual cables post-installation.<br />
Article-No. Type<br />
Length<br />
(L)<br />
Stud<br />
Ø Colour Material Drawing<br />
155-23701 WICKELCLIP-SB5 60 5 Black (BK) POM<br />
151-00484 TCSB5CYCC 55 5 Black (BK) PA66HIRHS<br />
151-26101 TC-SB5C 55 5 Black (BK) PA66HS<br />
All dimensions in mm. Subject to technical changes.<br />
TCSB5CYCC: Winder bar, weld stud and connector clip combined to create a complex and incredibly useful unit.<br />
Material Data Material Data<br />
Material Polyacetal (POM)<br />
Material Polyamide 6.6 high impact modified,<br />
Operating -40 °C to +90 °C continuous,<br />
heatstabilised (PA66HIRHS)<br />
Temperature (+110 °C for 500 h)<br />
Operating -40 °C to +105 °C<br />
Flammability UL94 HB<br />
Temperature<br />
Flammability UL94 HB<br />
Material Data<br />
Material Polyamide 6.6 heatstabilised<br />
(PA66HS)<br />
Operating<br />
Temperature<br />
Flammability UL94 V2<br />
Technical Table<br />
-40 °C to +105 °C continuous,<br />
(+145 °C for 500 h)<br />
halogenfree<br />
�<br />
�<br />
�
BundlingClip with weld stud<br />
support, BC series<br />
Features and Benefits<br />
BundlingClips with weld stud support have<br />
been designed to provide a simple means of<br />
banding cables and cable looms. They are<br />
the ideal solution if manufacturing tolerances<br />
during processing cannot be excluded. The<br />
clips are also particularly suitable for cables<br />
of reduced weight and diameter. The cable<br />
set is wound on a weld stud.<br />
The cables are fixed to the winder bar using<br />
cable ties or adhesive tape (this process can<br />
even be automated using the AT2000 and<br />
ATS3080). In terms of its size and shape the<br />
BundlingClip BC has been designed to provide<br />
the optimum solution for cable bundles.<br />
Application<br />
The BC series is proving very popular in the<br />
automotive industry as a means of installing<br />
cable sets easily in various areas of the<br />
vehicle.<br />
Technical Table<br />
Article-No. Type<br />
Length<br />
(L)<br />
Width<br />
(W)<br />
Material Data<br />
Material Polyamide 6.6 high impact modified<br />
(PA66HIR)<br />
Operating<br />
Temperature<br />
Flammability UL94 HB<br />
Material Polyamide 6.6 high impact modified,<br />
heatstabilised (PA66HIRHS)<br />
Operating<br />
Temperature<br />
Flammability UL94 HB<br />
151-00017 BC2212 55 34.0 5 Black (BK) PA66HIR<br />
151-00016 BC30 55 42.0<br />
All dimensions in mm. Subject to technical changes.<br />
The slim line BS series is particularly compact and flexible.<br />
Material Data<br />
-40 °C to +80 °C continuous,<br />
(+105 °C for 500 h)<br />
-40 °C to +105 °C<br />
Stud<br />
Ø Colour Material Drawing<br />
5<br />
Black (BK) PA66HIRHS<br />
Cable Ties and Fixings<br />
Fixing Elements 1.4<br />
�<br />
�<br />
87
1.4<br />
88<br />
Cable Ties and Fixings<br />
Fixing Elements<br />
BundlingClip with Connector Clip<br />
Features and Benefits<br />
The cable bundle is fastened to the winder<br />
bar with cable ties or adhesive tape. It is<br />
routed above the connector clip.<br />
The two TapeClip elements are used to clip<br />
connectors onto the cable set. The connector<br />
is fixed securely to the set and is protected<br />
against soiling. None of the elements are<br />
direction-specific.<br />
Application<br />
The connector clips used here have been<br />
designed for electronic cables and cable sets<br />
used in the automotive industry.<br />
Technical Table<br />
Article-No. Type<br />
Material Data<br />
Material Polyamide 6.6 heatstabilised (PA66HS)<br />
Operating -40 °C to +105 °C continuous,<br />
Temperature (+145 °C for 500 h)<br />
Flammability UL94 V2<br />
Material Polyamide 6.6 high impact modified,<br />
heatstabilised (PA66HIRHS)<br />
Operating<br />
Temperature<br />
Flammability UL94 HB<br />
-40 °C to +105 °C<br />
Length<br />
(L) Colour Material Drawing<br />
150-41397 CONNECTOR CLIP 55 Black (BK) PA66HIRHS<br />
155-31102 YAZ-CONN-TAPE-CLIP 55 Black (BK) PA66HS<br />
All dimensions in mm. Subject to technical changes.<br />
The connector clips used here have been designed for cables and cable sets used in the automotive<br />
industry.<br />
Material Data<br />
halogenfree<br />
�<br />
�
ConnectorClips for Round Hole<br />
The connectors are mounted simply by pushing them onto the corresponding clip.<br />
Article-No. Type<br />
Fixing Hole Ø<br />
(FH)<br />
Panel<br />
Thickness<br />
min.<br />
Panel<br />
Thickness<br />
max. Colour Material Drawing<br />
155-38102 YCC-FT6-S 6.5-7.0 0,8 1,5 Black (BK) PA66HIRHS<br />
151-00606 YCCFT6S-2 6.5-7.0 0,8 1,5 Black (BK) PA66HIRHS<br />
155-32602 FT6LG.M.ST.AUFN.II 6.5-7.0 0,8 5,0 Black (BK) PA66HIRHS<br />
155-03800 FT6 LG-AMP 6.5-7.0 0,7 6,0 Black (BK) PA66HIRHS<br />
155-18901 FT6LG.M.STECKERAUFN. 6.4-7.1 0,8 6,0 Black (BK) PA66HIRHS<br />
155-43702 FT6S-Y-CONN-TS 6.5-7.0 0.8 1.5 Black (BK) PA66HIRHS<br />
155-30702 FT6LG.YAZ.CONNECT-TS 6.4-7.1 0,7 5,1 Black (BK) PA66HIRHS<br />
151-00235 Big YCC TS 6.4-7.1 0,7 5,1 Black (BK) PA66HIRHS<br />
151-00459 FT6LG.JAE.CONNECT.TS 6.5-7.0 0,7 5,1 Black (BK) PA66HIRHS<br />
155-36002 STECKERHALTER SITZ 6.5-7.0 0,6 3,0 Black (BK) PA66HIRHS<br />
150-54498 BIG CONNECTOR CLIP 6.5 0,7 2.7 Black (BK) PA66HIRHS<br />
All dimensions in mm. Subject to technical changes.<br />
Cable Ties and Fixings<br />
Fixing Elements 1.4<br />
The connector can be removed without damage, a practical and cost-efficient benefit in the case of maintenance, repair work and an later<br />
recycling. The additional turnstop on some of the ConnectorClips prevents the rotation of the clip within the hole after assembly.<br />
Technical Table<br />
89
1.4<br />
90<br />
Cable Ties and Fixings<br />
Fixing Elements<br />
ConnectorClips for Oval Hole<br />
The connectors for oval holes are mounted as well simply by pushing them onto the corresponding clip. In case of maintenance, repair or<br />
recycling it can easily be removed without damage. The arrowhead locks into place when inserted into the hole palpably and ensures a<br />
secure fixing at all times.<br />
Material Data<br />
Material Polyamide 6.6 high impact modified,<br />
heatstabilised (PA66HIRHS)<br />
Operating<br />
Temperature<br />
Flammability UL94 HB<br />
Technical Table<br />
Article-No. Type<br />
-40 °C to +105 °C<br />
Fixing Hole Ø<br />
(FH)<br />
Panel<br />
Thickness<br />
min.<br />
Panel<br />
Thickness<br />
max. Colour Material Drawing<br />
151-00704 YCCFT82x185 8.2x16.0 1.6 1.6 Black (BK) PA66HIRHS<br />
151-00180 YCCFT62x122 6.2x12.2 0.6 6.0 Black (BK) PA66HIRHS<br />
151-00496 CC03 8.0x15.0 0.7 6.3 Black (BK) PA66HIRHS<br />
151-00597 CC04 8.0x15.0 0.7 6.3 Black (BK) PA66HIRHS<br />
155-43802 STECKERAUFN.LL-FUSS 7.0x12.0 1.2 2.0 Black (BK) PA66HIRHS<br />
151-00194 CCSFT7x12 7.0x12.0 0.8 2.0 Black (BK) PA66HIRHS<br />
151-00222 CCSFT7x12 7.0x12.0 0.8 2.0 Grey (GY) PA66HIRHS<br />
151-00595 CCSFT7x12 7.0x12.0 0.8 2.0 Blue (BU) PA66HIRHS<br />
151-00513 YCCSFT62122 6.2x12.2 0,6 1,0 Black (BK) PA66HIRHS<br />
All dimensions in mm. Subject to technical changes.<br />
�
CTC Convoluted Tubing Clamp<br />
Features and Benefits<br />
The clamps for corrugated tubing are available<br />
in various nominal diameters and have<br />
a base in the shape of a fir tree for inserting<br />
in a drilled hole. Due to the individual fins,<br />
the clamp can be inserted into blind holes<br />
with threading. The corrugated tubing is<br />
snapped into the clamp where it is securely<br />
held. The rib on the inside of the bracket<br />
fits into the profile of the tubing and prevents<br />
the tubing from slipping.<br />
Application<br />
CTC clamps are used for example in the<br />
automobile, harness making, electrical<br />
industry and wherever corrugated tubing<br />
has be quickly and firmly fixed.<br />
CTC10FT6LG<br />
Technical Table<br />
Article-No. Type<br />
Width<br />
(W)<br />
Height<br />
(H)<br />
Height<br />
(H2)<br />
Nominal<br />
Ø<br />
Disc<br />
Ø<br />
Fixing<br />
Hole Ø<br />
(FH)<br />
Panel<br />
Thickness<br />
min.<br />
Panel<br />
Thickness<br />
max.<br />
Special<br />
Features<br />
151-14314 CTC4.5FT6LG 8.0 16.1 11.1 4.5 16.0 6.5-7.0 0.75 6.0 5<br />
151-14313 CTC7.5FT6LG 8.0 18.6 11.1 7.5 16.0 6.5-7.0 0.75 6.0 5<br />
155-31602 CTC7.5FT9 8.0 19.9 12.2 7.5 23.0 8.7-9.0 3.0 5.0 5<br />
151-14311 CTC10FT6 8.0 21.4 7.5 10.0 16.0 6.5-7.0 0.75 3.0 5<br />
151-00018 CTC10FT6LG 8.0 21.4 11.1 10.0 16.0 6.5-7.0 0.75 6.0 5<br />
155-17801 CTC10FT9 8.0 22.7 12.2 10.0 23.0 8.7-9.0 3.0 5.0 5<br />
151-14312 CTC13FT6 8.0 25.2 7.5 13.0 16.0 6.5-7.0 0.75 3.0 5<br />
151-00019 CTC13FT6LG 8.0 25.2 11.1 13.0 16.0 6.5-7.0 0.75 6.0 5<br />
155-25201 CTC22FT9 8.0 37.7 12.2 22.0 23.0 8.7-9.0 3.0 5.0 5<br />
All dimensions in mm. Subject to technical changes.<br />
The tubing is clicked into the CTC clamp and is held firmly.<br />
Material Data<br />
Material Polyamide 6.6 high impact modified,<br />
heatstabilised (PA66HIRHS)<br />
Colour Black (BK)<br />
Operating<br />
Temperature<br />
-40 °C to +105 °C<br />
Flammability UL94 HB<br />
Cable Ties and Fixings<br />
Fixing Elements 1.4<br />
�<br />
91
1.4<br />
92<br />
Cable Ties and Fixings<br />
Fixing Elements<br />
Clamps for corrugated tubing<br />
CTC series with weld stud clip<br />
Features and Benefits<br />
Clamps for corrugated tubing can be supplied<br />
for nominal diameters from 4.5 to<br />
17 mm. They are fixed to M6 weld studs.<br />
The “soft-push” mechanism makes mounting<br />
quick and easy. The tube simply needs<br />
to be clicked into the bracket. A rib on the<br />
inside of the bracket fits into the profile of<br />
the tubing to prevent slipping. If necessary,<br />
the clamp can be unscrewed and removed<br />
from the weld stud.<br />
Application<br />
These holders are used for example in the<br />
automotive industry, in the production of<br />
cable harnesses and in the electrical industry.<br />
Their quick and easy mounting is the reason<br />
for their universal success wherever corrugated<br />
tubing and pipes have to be fixed<br />
quickly and securely.<br />
Technical Table<br />
Article-No. Type<br />
Length<br />
(L)<br />
Width<br />
(W)<br />
Height<br />
(H)<br />
Material Polyamide 6.6 high impact modified,<br />
heatstabilised (PA66HIRHS)<br />
Operating<br />
Temperature<br />
Flammability UL94 HB<br />
-40 °C to +105 °C<br />
Nominal<br />
Ø Colour Material<br />
151-00700 CTC4.5SBS6 28,6 11.0 18.7 4.5 Black (BK) PA66HIRHS 5<br />
151-00701 CTC7.5SBS6 31,8 11.0 19.4 7.5 Black (BK) PA66HIRHS 5<br />
151-00702 CTC10SBS6 35,3 11.0 22.2 10.0 Black (BK) PA66HIRHS 5<br />
151-00703 CTC13SBS6 37.0 11.0 26.5 13.0 Black (BK) PA66HIRHS 5<br />
151-00010 CTC17SBS6 44,6 11.0 33.2 17.0 Black (BK) PA66HIRHS 5<br />
All dimensions in mm. Subject to technical changes.<br />
The tubing is clicked into the CTC clamp and is<br />
held firmly.<br />
Material Data<br />
CTC17SBS6 CTC4,5SBS6<br />
�<br />
Special<br />
Features Drawing
Clamps for corrugated tubing<br />
Features and Benefits<br />
Clamps for corrugated tubing are available<br />
for a variety of nominal diameters. The clamp<br />
is fixed in place by means of an arrowhead<br />
foot which hooks into place at the back of<br />
the sheet and ensures quick and easy mounting.<br />
The tube is guided accurately simply by<br />
clicking into the holder. A rib on the inside of<br />
the bracket fits into the profile of the tubing<br />
to prevent slipping.<br />
The RCCD model has been designed for use<br />
in oval drill holes measuring 6.2 x 12.2 mm.<br />
The OCTCSFT6,5 clamp has been designed<br />
for fastening corrugated tubes with nominal<br />
diameters between 55 and 80 mm.<br />
The CTC-L profile clamp is also fastened to a<br />
metal edge.<br />
Application<br />
These clamps are used for example in the<br />
automotive industry, in the production of<br />
cable harnesses and in the electrical industry.<br />
Their quick and easy mounting is the reason<br />
for their universal success wherever corrugated<br />
tubing and pipes have to be fixed quickly<br />
and securely.<br />
Technical Table<br />
Article-No. Type<br />
150-92300<br />
155-04000<br />
151-00598<br />
Retainer Corrugated<br />
Cond. D21*<br />
Retainer Corrugated<br />
Cond. D24*<br />
Corrugated Cond<br />
D28*<br />
Length<br />
(L)<br />
Width<br />
(W)<br />
Material Polyamide 6.6 high impact modified,<br />
heatstabilised (PA66HIRHS)<br />
Operating<br />
Temperature<br />
Flammability UL94 HB<br />
-40 °C to +105 °C<br />
Cable Ties and Fixings<br />
The OCTCSFT6,5 clamp has been designed specifically for fastening corrugated tubes.<br />
Material Data<br />
Height<br />
(H)<br />
Fixing<br />
Hole Ø<br />
(FH)<br />
Panel<br />
Thickn.<br />
min.<br />
Panel<br />
Thickn.<br />
max. Colour Material<br />
31 22 30 6.2x12.2 0.7 2.5 (BK) PA66HIRHS 5<br />
33 22 33 6.2x12.2 0.7 2.5 (BK) PA66HIRHS 5<br />
37 22.0 37 6.2x12.2 0.7 3.0 (BK) PA66HIRHS 5<br />
151-00021 OCTCSFT6.5 64.0 20.0 24.5 6.3-6.6 1.0 2.5 (BK) PA66HIRHS 5<br />
151-00026 CTCLPROFILE 49.7 12.0 47 7.8-8.2 2.3 2.7 (BK) PA66HIRHS 5<br />
All dimensions in mm. Subject to technical changes.<br />
* for oval hole<br />
Fixing Elements 1.4<br />
�<br />
Special<br />
Features Drawing<br />
93
1.4<br />
94<br />
Cable Ties and Fixings<br />
Fixing Elements<br />
Automatic Harness Clips<br />
Features and Benefits<br />
These clips can be attached to the panel<br />
prior to installing the cables. Simply pushing<br />
the cable into place, closes the clip which<br />
activates the automatic locking feature. The<br />
parts prefixed with an 'I' can be interlocked<br />
giving a greater choice of installation<br />
options.<br />
Application<br />
Offering a simple and secure method of<br />
attaching cables to panels. Originally designed<br />
for the automotive industry they are finding<br />
a wide variety of applications in all industries<br />
using sheet metal panels.<br />
Technical Table<br />
AHC 1AH - 2AH<br />
W<br />
AHC2 SS<br />
IAHC_AH<br />
Material Data<br />
IAHC_T<br />
Elements AH and T<br />
connected.<br />
Material Polyamide 6 high impact modified (PA6HIR)<br />
Operating<br />
Temperature<br />
Flammability UL94 HB<br />
�<br />
Material Data<br />
Material Polyamide 6.6 high impact modified,<br />
heatstabilised (PA66HIRHS)<br />
Operating<br />
Temperature<br />
Flammability UL94 HB<br />
-40 °C to +80 °C continuous,<br />
(+105 °C for 500 h)<br />
-40 °C to +105 °C<br />
�<br />
Panel Panel<br />
Length Length Width Disc Bundle Fixing Hole Thickness Thickness<br />
Article-No. Type (L) (L2) (W) Ø Ø max. Ø (FH) min. max. Material Colour<br />
151-00212 AHC1AH 25.0 7.5 10.0 20.0 13.0 6.2-6.7 0.7 3.0 PA66HIRHS Black (BK)<br />
151-00210 AHC2AH 29.0 7.5 10.0 20.0 20.0 6.2-6.7 0.7 3.0 PA66HIRHS Black (BK)<br />
151-00208 AHC2BH 29.0 7.0 10.0 20.0 20.0 6.2x12.2 0.7 3.0 PA66HIRHS Black (BK)<br />
151-00206 AHC2SS 31.5 – 10.0 – 20.0 – – – PA66HIRHS Black (BK)<br />
151-00370 AHC3BHR 40.0 7.0 10.0 24.0 28.0 6.2x12.2 0.7 3.0 PA66HIRHS Black (BK)<br />
151-00371 AHC3CHR 40.0 7.0 10.0 24.0 28.0 6.2x12.2 0.7 3.0 PA6HIR Black (BK)<br />
151-00373 AHC3SB 41.0 – 10.0 27.0 28.0 – – – PA66HIRHS Black (BK)<br />
151-00374 AHC4AH 58.0 7.5 13.5 24.0 36.0 6.2-6.7 0.7 3.0 PA6HIR Black (BK)<br />
151-00223 IAHC1T 23.0 – 10.0 – 13.0 – – – PA66HIRHS Black (BK)<br />
151-00199 IAHC2T 30.0 – 10.0 – 20.0 – – – PA66HIRHS Black (BK)<br />
151-00197 IAHC3AH 40.0 7.5 13.5 24.0 28.0 6.2-6.7 0.7 2.7 PA66HIRHS Black (BK)<br />
151-00379 IAHC3BH 40.0 7.0 13.5 24.0 28.0 6.2x12.2 0.7 2.7 PA66HIRHS Black (BK)<br />
151-00381 IAHC3CH 40.0 7.0 13.5 24.0 28.0 6.2x12.2 0.7 3.0 PA66HIRHS Black (BK)<br />
151-00213 IAHC3T 40.0 – 10.0 – 28.0 – – – PA66HIRHS Black (BK)<br />
151-00211 IAHC4AH 46.0 7.0 13.0 24.0 36.0 6.2-6.7 0.5 2.5 PA6HIRHS Black (BK)<br />
151-00383 IAHC4CH 47.0 7.0 13.5 24.0 36.0 6.2x12.2 0.7 3.0 PA6HIRHS Black (BK)<br />
151-00207 IAHC4T 47.0 – 13.5 – 36.0 – – – PA66HIRHS Black (BK)<br />
151-00205 IAHC5BH 57.0 7.0 13.5 24.0 45.0 6.2x12.2 0.7 2.7 PA66HIRHS Black (BK)<br />
151-00195 IAHC5T 57.0 – 13.5 – 45.0 – – – PA66HIRHS Black (BK)<br />
All dimensions in mm. Subject to technical changes.
Pipe and Hose Clips, IPC-Series<br />
Features and Benefits<br />
These clips can be attached to the panel<br />
prior to installing the pipe or hose, simply<br />
push the pipe into the clip for a firm and<br />
secure fixing. The parts prefixed with an 'I'<br />
can be interlocked together giving a greater<br />
choice of installation options.<br />
Application<br />
Originally designed for the automotive industry<br />
they are finding a wide and time saving<br />
variety of applications in all industries where<br />
the use of a cable tie is not suitable.<br />
IPC Clip<br />
Technical Table<br />
Article-No. Type<br />
Connectable Arrowhead<br />
Height<br />
(H)<br />
Width<br />
(W)<br />
Material Data<br />
Material Polyamide 6.6<br />
high impact modified (PA66HIR)<br />
Disc<br />
Ø<br />
Operating<br />
Temperature<br />
Flammability UL94 HB<br />
Material Polyamide 6.6 (PA66)<br />
Operating<br />
Temperature<br />
Flammability UL94 V2<br />
Bundle Ø<br />
max.<br />
-40 °C to +80 °C continuous,<br />
(+105 °C for 500 h)<br />
-40 °C to +85 °C continuous,<br />
(+105 °C for 500 h)<br />
Fixing Hole Ø<br />
(FH)<br />
Cable Ties and Fixings<br />
Fixing Elements 1.4<br />
Panel Thickness<br />
max. Material Colour<br />
151-00096 IPC10AH 18.4 10.0 22.0 12.5 6.3 1.6 PA66HIR Black (BK)<br />
151-14130 IPC13AH 21.0 10.0 22.0 13.5 6.3 1.6 PA66 Black (BK)<br />
151-14500 IPC15AH 23.0 10.0 22.0 14.7 6.3 1.6 PA66HIR Black (BK)<br />
151-14601 IPC23AH 34.0 10.0 22.0 25.0 6.3 1.6 PA66 Black (BK)<br />
Connectable<br />
151-14400 IPC10P 15.0 10.0 – 12.5 – – PA66HIR Black (BK)<br />
151-14132 IPC13P 17.4 10.0 – 13.5 – – PA66 Black (BK)<br />
151-14502 IPC15P 19.5 10.0 – 14.7 – – PA66HIR Black (BK)<br />
151-14603 IPC23P 30.5 10.0 – 25.0 – – PA66 Black (BK)<br />
All dimensions in mm. Subject to technical changes.<br />
Simple and secure installation of pipes or hoses to panels.<br />
Material Data<br />
halogenfree<br />
�<br />
�<br />
IPC P Clip connected.<br />
IPC AH Clip connected.<br />
95