Hardened and Ground Adapter Plates Collet Stops - Royal Products
Hardened and Ground Adapter Plates Collet Stops - Royal Products
Hardened and Ground Adapter Plates Collet Stops - Royal Products
- No tags were found...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
QUICK-GRIP CNC COLLET CHUCKACCESSORIESQuick-Grip <strong>Collet</strong> Installation Toolq Easy to use tool enables collets to be changedin seconds.q Simply insert the steel pins into the collet faceholes <strong>and</strong> squeeze main trigger to collapse collet.q Once the collet is positioned within the chuck,squeeze the trigger lock to exp<strong>and</strong> <strong>and</strong> release.q Heavy-duty construction for durability.<strong>Royal</strong> Quick-Grip <strong>Collet</strong>Installation ToolFITS CHUCK MODEL PART NUMBER PRICEQG-42 44097 $550QG-65 44098 550QG-80 44099 550Quick-Grip Ejectorsq Ejectors are used in sub-spindle applications on Accu-Length Chucks topush finished workpieces into the part catcher upon completion.q A hardened plunger rod <strong>and</strong> a bronze bushing work together to providesmooth, consistent operation.q New design enables tip to be changed without removing ejector assemblyfrom the chuck.q Available in st<strong>and</strong>ard <strong>and</strong> compact models:– St<strong>and</strong>ard Model – for parts ranging in size from 0.81" to 3.25" dia.– Compact Model – for parts ranging in size from 0.18" to 1.25" dia.q Easily customizable as workpiece configurations require.For an alternative solution to an ejector, check out the <strong>Royal</strong> Grippex Coolant-Actuated Bar Puller. The Grippex, when fitted with special jaws, can be used topull finished parts from a sub-spindle, eliminating the need for an ejector <strong>and</strong>freeing up the spindle bore to swallow longer parts.<strong>Royal</strong> Quick-Grip EjectorsFITS ACCU-LENGTH EJECTOR PART DIAMETER PARTCHUCK MODEL STYLE RANGE NUMBER PRICEQG-42 St<strong>and</strong>ard 0.81"–1.63" 44040QG-65 St<strong>and</strong>ard 0.81"–2.63" 44041QG-80 St<strong>and</strong>ard 0.81"–3.25" 44042QG-42 Compact 0.18"–1.25" 44043QG-65 Compact 0.18"–1.25" 44044QG-80 Compact 0.18"–1.25" 44045$698709719604614625Quick-Grip St<strong>and</strong>ard <strong>Stops</strong>q A stop is used for accurate z-axis positioningof short workpieces within a collet.q Stop rod length is easily adjusted.q The stop locates against a shoulder within the chuckbody <strong>and</strong> is held in place with radially-located screws.q All <strong>Royal</strong> stops can be installed with chuck mounted tothe spindle.q For use with <strong>Royal</strong> Accu-Length <strong>and</strong> Pull-to-a-StopQuick-Grip <strong>Collet</strong> Chuck models.<strong>Royal</strong> Quick-Grip St<strong>and</strong>ard <strong>Stops</strong>FITSMAX THROAT DEPTH*CHUCK ACCU-LENGTH PULL-TO-A-STOP PARTMODEL CHUCK MODELS CHUCK MODELS NUMBER PRICEQG-42 2.03 2.89 44080QG-65 2.47 3.33 44081QG-80 2.51 3.33 44084* Measured from collet face.$18020523314 TEL: 1-800-645-4174 • Fax: 1-800-424-2082 • www.royalprod.com
QUICK-GRIP CNC COLLET CHUCKACCESSORIESQuick-Grip Extra-Depth <strong>Stops</strong><strong>Hardened</strong> <strong>and</strong> <strong>Ground</strong> <strong>Adapter</strong> <strong>Plates</strong>q A stop is used for accurate z-axis positioning of a workpiece within a collet.q <strong>Royal</strong> Quick-Grip extra-depth stops have a greater throat depth than our st<strong>and</strong>ard stops, enablinglonger parts to swallowed while minimizing protrusion beyond the collet face.q As with our st<strong>and</strong>ard QG stops, rod length is easily adjusted <strong>and</strong> the entire assembly can be installedwith the chuck mounted to the spindle.q For use with <strong>Royal</strong> Accu-Length <strong>and</strong> Pull-to-a-Stop Quick-Grip <strong>Collet</strong> Chuck models.<strong>Royal</strong> Quick-Grip Extra-Depth <strong>Stops</strong>FITS MAX THROAT DEPTH* MAX MINCHUCK ACCU-LENGTH PULL-TO-A-STOP PART DRAWTUBE PARTMODEL CHUCK MODELS CHUCK MODELS DIAMETER I.D. NUMBER PRICEQG-42 5.00 5.86 1.25 1.66 44802QG-65 6.00 6.86 1.25 1.66 44804QG-65 6.00 6.86 2.25 2.73 44806QG-80 6.00 6.82 2.00 2.48 44808QG-80 6.00 6.82 2.75 3.23 44810* Measured from collet face.$319361361435435ProudlyMadein U.S.A.q <strong>Adapter</strong> plates offer the flexibility to mountcollet chucks <strong>and</strong> 3-jaw chucks to a widerrange of spindles:- Mount a larger chuck on a smaller spindlefor increased capacity.- Mount a smaller chuck on a larger spindle forincreased tool clearance <strong>and</strong> higher speeds.<strong>Royal</strong> <strong>Adapter</strong> <strong>Plates</strong>q All <strong>Royal</strong> adapter plates are hardened toRc 61-63.q High accuracy – 0.0002" TIR guaranteed.q Metric screws included for mounting plateto spindle.q Drive button included on all plates.SPINDLE CHUCKSPINDLE CHUCK PLATE PLATE THRU-HOLE MOUNTING MOUNT PARTMOUNT MOUNT DIAMETER THICKNESS DIA. BOLTS THREADS NUMBER PRICEA2-5 A2-6 6.68 1.00 2.63 M-10 M-12 44000A2-6 A2-6 6.68 1.25 3.56 M-12 M-12 44009A2-6 A2-8 8.68 1.00 3.75 M-12 M-16 44004A2-8 A2-6 8.25 1.75 3.44 M-16 M-12 44010A2-8 A2-8 8.69 2.00 4.76 M-16 M-16 44011A2-11 A2-8 11.00 2.00 4.76 M-20 M-16 44014110MM A2-5 5.31 0.75 2.00 M-10 M-10 44006140MM A2-6 6.68 1.00 3.00 M-10 M-12 44008Other configurations available. Contact a <strong>Royal</strong> <strong>Products</strong> applications engineer at 1-800-645-4174with your requirements.$1,1801,0481,3631,3631,4361,7281,0211,212TEL: 1-800-645-4174 • Fax: 1-800-424-2082 • www.royalprod.com 15
LOW-PROFILE CNC COLLET CHUCKACCESSORIESEjectorsq Ejectors are used in sub-spindle applicationsto push finished workpieces into the partcatcher upon completion.q Pusher head (shown) can be adjusted ormodified as applications require (head notincluded with 5C, 16C, or 3J models).q A hardened plunger rod <strong>and</strong> a bronzebearing work together to provide smooth,consistent operation.q Spring is encased inside of body for protection.<strong>Royal</strong> Ejectors forLow-Profile <strong>Collet</strong> ChucksFITS CHUCK MODEL PART NUMBER PRICE5C Accu-Length 4514516C Accu-Length 451463J Accu-Length 45147S-20 Accu-Length 45148S-26 Accu-Length 45149S-30 Accu-Length 45150$280309309618628669For an alternative solution to an ejector, check out the <strong>Royal</strong> Grippex Coolant-Actuated Bar Puller. The Grippex, when fitted with special robot gripper jaws,can be used to pull finished parts from a sub-spindle, eliminating the need for an ejector <strong>and</strong> freeing up the spindle bore to swallow longer parts.<strong>Collet</strong> <strong>Stops</strong><strong>Royal</strong> <strong>Collet</strong> <strong>Stops</strong> forLow-Profile <strong>Collet</strong> Chucksq A collet stop is used for accurate z-axis positioningof short workpieces within a collet.q Stop rod length is easily adjusted.q Assembly screws directly into rear of collet.FITS CHUCK MODEL PART NUMBER PRICE5C Accu-Length <strong>and</strong> Pullback 2003016C Accu-Length <strong>and</strong> Pullback 451513J Accu-Length <strong>and</strong> Pullback 45152S-20 Accu-Length 45153S-26 Accu-Length 45154S-30 Accu-Length 45155S-40 Accu-Length 45158$15144144144151169180Heavy-Duty <strong>Collet</strong> Wrenches<strong>Royal</strong> Heavy-Duty <strong>Collet</strong> Wrenchesq Heavy-duty one-piece head – pins won't shear off.q Comfortable knurled h<strong>and</strong>le offers superior grip<strong>and</strong> makes collet installation a breeze.q Cross-drilled hole in h<strong>and</strong>le allows a screwdriverto be used as a lever for hard-to-remove collets.q Available for all popular collet models.COLLET NUMBER OF PARTSTYLE COLLET SLOTS NUMBER PRICE5C 3 4518716C/3J 3 4518816C/3J 4 45189S-20 Master 3 45190S-26 Master 4 45191S-30 Master 4 45192S-40 Master 4 45193$110110110153153153229TEL: 1-800-645-4174 • Fax: 1-800-424-2082 • www.royalprod.com 23
Change language