Attachment-retained restorations

UNIABUTMENTBar fabricationInsertingInstall the Profile Bar Insert into the housing with thesupplied Insertion Tool. The Profile Bar Insert shouldsnap in audibly.CLINICAL PROCEDUREInstallationAttach the cleaned bar to the UniAbutments withthe Bridge Screws using the screwdriver. Tighten thescrews using the screwdriver and Torque Wrench.Recommended torque for final seating:15 Ncm15 NcmFinal resultSeat the overdenture over the bar. Verify that therequired retention is obtained.Care and maintenanceReplace the Profile Bar Insert, if the required retentionis not obtained.To remove the Profile Bar Insert from the over -denture, push it laterally with a flat instrument.The Profile Bar Insert will fall out of the metal housing.Position the new insert with the desired retention onthe supplied Insertion Tool and press it in position.Verify that the required retention is obtained.35