TruVision DVR 30.pdf

Chapter 7: System settingsAudio and remoteUse the Audio and Remote screen to define the audio output settings and specify theremote ID for the device. To access the Audio and Remote screen, click Audio andRemote Setup on the System screen.Select Live/PB in the Audio Output box to play audio during live or playback modes.Select On in the Key Beep box to allow front panel buttons to beep when pressed.Specifying a remote ID for the device lets you control up to 16 DVRs using a singleremote control. See “Controlling multiple DVRs with one remote control” on page 16for more information.RS-485 settingsUse the RS-485 Setting screen to define the settings for the RS-485 ports. Settingsdefined in this screen must match the PTZ settings of the camera connected to theRS-485 port. To access the RS-485 Setting screen, click RS-485 Setting on the Systemscreen.RS-232 settingsUse the Device Setting screen to define settings for the serial port. This port is used toconnect point-of-sale (POS) devices to the TVR 30. To access the RS-232 Settingscreen, click RS-232 Setting on the System screen.Hard drive settingsUse the Hard Drives screen to define settings for the hard drive. Table 13 on page 77describes the commands and options available on this screen. To access the HardDrives screen, click Hard Drives on the System menu.76 TruVision DVR 30 User Manual