TruVision DVR 30.pdf

Chapter 2: InstallationInstallation environmentWhen installing your product, consider these factors:• Ventilation• Temperature• Moisture• Chassis loadVentilation: Do not block any ventilation openings. Install in accordance with themanufacturer’s instructions. Ensure that the location planned for the installation ofthe unit is well ventilated.Temperature: Consider the TVR 30’s operating temperature (32 to 104°F, 0 to 40°C)and humidity specifications (10 to 90% relative, noncondensing) before choosing aninstallation location. Extremes of heat or cold beyond the specified operatingtemperature limits may reduce the life expectancy of the TVR 30. Do not install theTVR 30 on top of other hot equipment. Leave 1.75 inches (44 mm) of space betweenrack mounted TVR 30 units.Moisture: Do not use the unit near water. Moisture can damage the internalcomponents. To reduce the risk of fire or electric shock, do not expose this unit to rainor moisture.Chassis: Equipment weighing less than 35 lbs (15.9 kg) may be placed on top of theTVR 30 only if the TVR 30 is placed on a shelf and not rack mounted.Be sure to power off the unit before making any connections. In order to prevent theunit from losing data and system damage that may be caused by sudden power, useof an uninterruptible power supply is highly recommended.Note: Do not remove the rubber feet, and always leave a space for air ventilation onthe unit’s bottom side.Unpacking the TVR 30 and its accessoriesWhen you receive the product, check the package and contents for damage, andverify that all items are included. There is an item list included in the package. If anyof the items are damaged or missing, please contact your local supplier.Items shipped with the product include:• TruVision DVR 30• IR (infrared) remote control• Two AAA batteries for the remote control4 TruVision DVR 30 User Manual