TruVision DVR 30.pdf

Chapter 6: Advanced setupDwell timeDwell time refers to the amount of time a camera view is displayed before movinginto a different camera view. Select a dwell time for the main monitor in the MainDwell Time box. Select a dwell time for the spot monitor in the Spot Dwell Time box.Sequence orderThe TVR 30 lets you configure the order of the cameras displayed in sequence modefor both the main monitor and the spot monitor.To configure the order of cameras:1. Click Display on the main menu to open the Display screen.2. Click Main Sequence Order to display the Main Sequence Order screen.The Main Sequence Order screen displays the sequence positions and a rowlisting all cameras as shown in the figure below. By default, the system orders thecameras by camera number. Click Back to clear the last sequence position. ClickBack repeatedly to clear all positions in the sequence.Note: To configure the sequence order for the spot monitor, click Spot SequenceOrder. The Spot Sequence Order screen displays.3. Click the camera you want to display first from the camera row. That cameranumber displays in the first sequence position.4. Continue clicking cameras in the order you want them displayed in sequencemode until all sequence positions are filled.Event displaySelect On in the Event Indicator box to display any alarm events on-screen.70 TruVision DVR 30 User Manual