TruVision DVR 30.pdf

Chapter 6: Advanced setupCamera alarm settingsUse the Camera Setting screen to define camera alarm settings.To define camera alarm settings:1. Click Alarms on the main menu to display the Alarms screen.2. Click Camera Setting Setup to display the Camera Setting screen.3. Select a camera in the Current Camera box.4. Select an alarm input in the Alarm Input box.5. Select an output in the Relay Output box.6. Select On in the Video Detection box to detect video loss.7. Select an Event Trigger Preset for that camera (mapped in the PTZ menu).8. You can also copy these settings to other cameras.Prealarm and post alarm secondsIn the Prealarm box, enter the prealarm seconds. The prealarm option defines thenumber of seconds recorded before a motion or external alarm is triggered andincludes the alarm data.In the Post-Alarm box, enter the post alarm seconds. The post alarm option definesthe number of seconds recorded after a motion or external alarm is triggered andincludes the alarm data.Network settingsAccessing the TVR 30 remotely through a network requires that you define certainnetwork settings. Use the Network screen (shown in Figure 31 on page 65) to definethe network settings of the TVR 30, including:• Ethernet settings• IP settings• E-mail notification settings• Syncing the TVR 30 time with the network• DDNS settings (Dynamic Domain Name Service)• UPnP settings (Universal Plug and Play)64 TruVision DVR 30 User Manual