TruVision DVR 30.pdf

Chapter 6: Advanced setupdesired detection areas remain, right-click, and then click Confirm to save yoursettings. Press Esc to return to the main menu.Alternatively, you can select the entire area by right-clicking, and then clickingSelect All. A grid covers the entire display screen. Click Deselect All to clear thescreen from motion detection.6. Select a sensitivity level in the Sensitivity box.Sensitivity level refers to the degree of pixel change in the specified area before amotion detection alarm triggers.Note: The Motion Detection screen also includes a motion sensitivity indicatorthat lets you test (by making motions on the camera) how much motion isrequired to trigger an alarm at the selected sensitivity level. A buzzer sounds offwhen an alarm is triggered.7. Select the target size in the Target Size box.Target size refers to the minimum size of an area in which motion is detected thustriggering a motion detection alarm.Assigning PTZ protocolAssign a PTZ protocol and ID to a camera to allow PTZ control of the camera while inPTZ mode. The PTZ Setup screen lets you assign a PTZ protocol and ID to a camera.To assign PTZ protocol and ID to a camera:1. Click Cameras on the main menu to display the Cameras screen.2. Click the PTZ Setup button to display the PTZ Setup screen.3. Select a protocol in the PTZ Protocol box.Available protocol values include:56 TruVision DVR 30 User Manual