Sauter - Pneumatic controller RLP100 - TROX

TROX GmbHHeinrich-Trox-Platz47504 Neukirchen-Vluyn,GermanyTel. +49(0)2845 202 0Fax +49(0)2845 202 265www.trox.deE-mail: trox@trox.deRoom pressure controllerSauter RLP 100 F901/915Product informationRoom temperature and room pressure controlOperatingpressureRoom temperaturecontroller, DW1 6RLP 100 F003, supply air1 2RLP 100 (901/915) room pressure1 8 6RoomReference roomRLP 100 F003, exhaust airRoom temperature controllerThe RLP 100 F003 flow volume controller should be connectedto exhausting room temperature controllers accordingto the hose system diagrams shown opposite. Theflow volume controllers exhaust through the input for thecompressed air command signal. In this way, the controllercan be be connected using only one hose ducting. Theroom temperature controller must be dimensioned for theexhaust flow quantity of the flow volume controller.Room pressure controllerThe room pressure controller should be installed close tothe room or reference room to keep the hoselengths of the measurement ducting short.Parallel controlSeveral flow volume controllers (supply and exhaust air)are mastered in parallel by one room temperature controller.If several controllers are connected to one room temperaturecontroller, the sum of the exhaust quantities of allflow volume controllers has to be made allowance for. Ifthis quantity exceeds the maximum return air capacity ofthe room temperature controller, a cut-off relay must beused.External operating pressure connectionsThe controllers RLP 100 F... can be connected directly tothe operating pressure supply as theyhave internal restrictors.15