Sauter - Pneumatic controller RLP100 - TROX

More documents

Recommendations

Info

TROX GmbHHeinrich-Trox-Platz47504 Neukirchen-Vluyn,GermanyTel. +49(0)2845 202 0Fax +49(0)2845 202 265www.trox.deE-mail: trox@trox.deRoom temperature controller(PN 21, DW)Operating pressuresupply1.3 bar1 6RLP 100 F0031 6RLP 100 F003Parallel controllerOperating mode E, MConstant flow volume controlOperating pressuresupply1.3 barRoom temperaturecontroller, DWOperating mode E, MFlow volume controllerSauter RLP 100 F003Product informationRoom temperature controllerThe RLP 100 F003 flow volume controller should be connectedto exhausting room temperature controllers accordingto the hose system diagrams shown opposite. Theflow volume controllers exhaust through the input for thecompressed air command signal. In this way, the controllercan be connected using only one hose ducting The roomtemperature controller must be dimensioned for theexhaust flow quantity of the flow volume controller (use acut-off relay if necessary,by the customer).Parallel controlSeveral flow volume controllers (supply and exhaust air)are mastered in parallel by one room temperature controller.If the flow volume control units are all of the same sizeand the min and max adjusting knobs are set to the samevalues, all the units will deliver the same flow volume.If the units have different sizes then they deliver equal-percentage.If several controllers are connected to one room temperaturecontroller, the sum of the exhaust quantities of all flowvolume controllers has to be made allowance for. If thisquantity exceeds the maximum return air capacity of theroom temperature controller, a cut-off relay must be used(by the customer).Constant flow volume controlThe RLP 100 F003 flow volume controller can also be usedas a constant flow volume controller1 6RLP 100 F003Operating mode F10
TROX GmbHHeinrich-Trox-Platz47504 Neukirchen-Vluyn,GermanyTel. +49(0)2845 202 0Fax +49(0)2845 202 265www.trox.deE-mail: trox@trox.deRoom temperature control with shut-off operation(PN 21, DW, NZ)S1Operating pressuresupply1.3 barS1Room temperaturecontroller, DW1 6 2RLP 100 F003Operating mode E, MShut-off function for section of buildingSupply/exhaust air sequence controlFlow volume controllerSauter RLP 100 F003Product informationFull shut-offWith pneumatic switches, the variable flow volume controlcan be overridden by the customer. The override control forthe full shut-off can take place at each controller separatelyor centrally for individual rooms or sections of buildings.The shut-off of the pressure ducting to the controller or tothe actuator causes the adjusting damper to close whenthe direction of control action is NZ (normally closed). Dueto this override with the TVZ/TVA/TVR unit series a fullshut-offcan be realised that meets the permitted leakagevolume flows according to DIN EN 1751, Class 4.S1 closedS1 open: Room temperature control operation: Override operationSafety function “Adjusting damper open”If, for safety’s sake, ventilation of certain sections of a buildinghas to be guaranteed, then flow volume control unitswith the direction of control action NO (normally open) shallbe used. If the compressed air supply fails, the adjustingdampers open in any event. Individual dampers can alsobe shut off in a similar way.Operating pressuresupply1.3 barRoom temperaturecontroller, DWSupply/exhaust air sequence control(master/slave)With different flow volumes, the flow volume setting ismade by the customer using the ∆ adjuster of the slavecontroller.1 6MRLP 100 F003, supply air1:1Operating mode MCut-off relayby the customer1 6RLP 100 F003, exhaust airOperating mode S11
Page 1: TROX GmbHHeinrich-Trox-Platz47504 N
Page 7 and 8: TROX GmbHHeinrich-Trox-Platz47504 N

Sauter - Pneumatic controller RLP100 - TROX

Create successful ePaper yourself

Delete template?

Save as template?