Sauter - Pneumatic controller RLP100 - TROX

TROX GmbHHeinrich-Trox-Platz47504 Neukirchen-Vluyn,GermanyTel. +49(0)2845 202 0Fax +49(0)2845 202 265www.trox.deE-mail: trox@trox.deRoom temperature controller(PN 21, DW)Operating pressuresupply1.3 bar1 6RLP 100 F0031 6RLP 100 F003Parallel controllerOperating mode E, MConstant flow volume controlOperating pressuresupply1.3 barRoom temperaturecontroller, DWOperating mode E, MFlow volume controllerSauter RLP 100 F003Product informationRoom temperature controllerThe RLP 100 F003 flow volume controller should be connectedto exhausting room temperature controllers accordingto the hose system diagrams shown opposite. Theflow volume controllers exhaust through the input for thecompressed air command signal. In this way, the controllercan be connected using only one hose ducting The roomtemperature controller must be dimensioned for theexhaust flow quantity of the flow volume controller (use acut-off relay if necessary,by the customer).Parallel controlSeveral flow volume controllers (supply and exhaust air)are mastered in parallel by one room temperature controller.If the flow volume control units are all of the same sizeand the min and max adjusting knobs are set to the samevalues, all the units will deliver the same flow volume.If the units have different sizes then they deliver equal-percentage.If several controllers are connected to one room temperaturecontroller, the sum of the exhaust quantities of all flowvolume controllers has to be made allowance for. If thisquantity exceeds the maximum return air capacity of theroom temperature controller, a cut-off relay must be used(by the customer).Constant flow volume controlThe RLP 100 F003 flow volume controller can also be usedas a constant flow volume controller1 6RLP 100 F003Operating mode F10