KESSEL-StaufixÂ® SWA Backwater Valve

More documents

Recommendations

Info

2. Installation2.6 Installation Example KESSEL Staufix ® SWA backwater valve 2 free hanging backwater flaps Manual closure lever Access chamber with coverTile, carpet orconcrete floorExpansion joint1.5 inch Sched 40 DWVPVC pipe for upgrading toKESSEL Staufix ® FKA orPumpfix ® FcmIllus. 10Everything for drainage 6
3. Inspection / 4. Maintenance3. InspectionThe Staufix ® SWA should be inspectedmonthly by the owner or a professional toinsure that it is in proper operationalcondition. The manual closure lever shouldbe closed and opened several times toinsure that it functions properly. Pleasemake sure that upon completion of themonthly inspection that the manual closurelever is in the ‘FLAP OPEN (FREEHANGING)’ (vertical) position.4. MaintenanceThe Staufix ® SWA should be maintainedevery six months by a professional. Pleasemake sure that no fixtures are drainedthrough the Staufix ® SWA during thisinspection. The procedure for maintainingthe valve is in Sections 4.1 and 4.2 of thisInstallation and User’s manual (As seen inIllustrations 11 thru 14).4.1 Dissassembly, Cleaning and Reassembly.Illustration 11a) Close the manual closure lever.b) Loosen and remove the six bolts.c) Remove the cover.Illustration 12a) Remove both free hanging flaps alongwith their housings.b) Clean all parts (try not to remove any ofthe gasket and seal grease).c) Check all seals and sealing areas andreplace with KESSEL replacement partsif necessary.d) Check the complete Staufix ® SWA inaccordance with this manual.7Everything for drainage
Page 1 and 2: INSTALLATION AND USER’S MANUALKES
Page 3 and 4: 1. Safety instructions / GeneralDea
Page 5: 2. Installation2.3 Installations su
Page 9 and 10: 5. UpgradingThe KESSEL Staufix ® S
Page 11 and 12: Notes11Everything for drainage

KESSEL-StaufixÂ® SWA Backwater Valve

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?