EFXac 100/125 - Jungheinrich

More documents

Recommendations

Info

6.7 Cleaning the aeration filterScrew out aeration filter with oil dipstick(3) and clean with compressed air orcleaning agent.36.8 Changing the hydraulic filterm– Unscrew hydraulic filter cap (4).– Change the filter insert; if the O-ring isdamaged, the O-ring must also bereplaced. Lightly oil the O-ring beforeinstallation.– Screw in the cap again.Waste filters must be disposed ofproperly.41102.GBF 11
6.9 Hydraulic oilm– Prepare the truck for the servicing and maintenance operations.Absolute care must be taken that the oil cannot be spilled into the sewer or onto thesoil. Waste oil must be securely stored until its proper disposal.Draining the oil:Suck off the hydraulic oil after removingaeration filter (3). If this method cannotbe used, the hydraulic oil can be drainedafter unscrewing the oil drain plug (5) atthe bottom of the hydraulic tank.Refilling oil:Screw in the oil drain plug again. Fill innew hydraulic oil and check the fillinglevel (max.) using the oil dipstick (3).Screw on the aeration filter again.Checking the hydraulic oil level:With the lifting mast completely lowered, check whether the hydraulic oil level isbetween the min. and max. marks of oil dipstick (3).If this is not the case, new hydraulic oil must be topped up.1102.GBF 12
Page 4 and 5:
Table of contentsABCorrect use and
Page 6 and 7:
FMaintenance of the fork lift truck
Page 8 and 9:
AACorrect use and application of th
Page 10 and 11:
BTruck description1 Application des
Page 12 and 13:
Item Designation1 t Lifting mast2 t
Page 14 and 15:
Driver position:The spacious, ergon
Page 16 and 17:
m1rl 8l 1l 21102.GBb7Astb12b5b1b2b6
Page 18 and 19:
3.4 EN standardsContinuous sound le
Page 20 and 21:
4.1 Truck identification plate30423
Page 22:
CTransportation and commissioning1
Page 26 and 27:
D Battery - Servicing, recharging,r
Page 28 and 29:
3 Charging the batteryffPark and lo
Page 30 and 31:
5 Check battery condition, acid lev
Page 32 and 33:
EOperation1 Safety regulations gove
Page 34 and 35: 2.1 Foot-operated elements121314Ite
Page 36 and 37: Item Symbol Operating anddisplay el
Page 38 and 39: Symbol Operating or displayelementG
Page 40 and 41: Additional symbol displaysTurn cut-
Page 42 and 43: Personnel protection facility force
Page 44 and 45: Symbol allocation displayTTime of d
Page 46 and 47: 3.2 Mounting and descending from th
Page 48 and 49: fManaging extraordinary situationsI
Page 50 and 51: 3.6 Providing operational readiness
Page 52 and 53: Travelling in aisles: Before drivin
Page 54 and 55: SteeringOutside of aisles the truck
Page 56 and 57: - Push “Guidance” (26) button.-
Page 58 and 59: 4.3 Lifting - lowering - traversing
Page 60 and 61: 4.4 Picking up, transporting, and p
Page 62 and 63: ffPicking up and setting down a loa
Page 64 and 65: OFFmanualsemi-automaticautomaticNo
Page 66 and 67: 5 TroubleshootingThis chapter allow
Page 68 and 69: 6.4 End of aisle safety device (o)V
Page 70 and 71: 6.7 Emergency lowering of the load-
Page 72 and 73: Disengaging the solenoid brake- Rem
Page 74 and 75: FMaintenance of the fork lift truck
Page 76 and 77: 3 Servicing and inspectionmThorough
Page 78 and 79: a) Check wheel nuts for tight seat
Page 80 and 81: A5 Lubrication scheduleFEEFGGFE0,18
Page 82 and 83: 6 Notes on maintenance6.1 Prepare t
Page 86 and 87: 6.10 Checking the brake fluidfBrake
Page 88 and 89: 6.13 Recommissioning the truckRecom
show all

EFXac 100/125 - Jungheinrich

Create successful ePaper yourself

Delete template?

Save as template?