EFXac 100/125 - Jungheinrich

FMaintenance of the fork lift truck1 Operational safety and environmental protectionfmThe checks and servicing operations contained in this chapter must be performed inaccordance with the intervals as indicated in the servicing checklists.Modifications of fork lift truck assemblies, especially of the safety installations, are notpermitted. On no account must the operational speeds of the truck be changed.Only original spare parts have been certified by our quality assurance service. Toensure safe and reliable operation of the fork lift truck, only spare parts of themanufacturer must be used. Used parts, oils and fuels must be disposed of inaccordance with the applicable environmental protection regulations. For oilchanges, the oil service of the manufacturer is available to you.Upon completion of any checking and servicing activities, the operations contained inthe section “Recommissioning” must be performed (refer to chapter F).2 Safety regulations applicable to truck maintenanceServicing and maintenance personnel: The fork lift truck must only be serviced andmaintained by trained personnel of the manufacturer. The service organization of themanufacturer has external technicians trained especially for these assignments. Wethus recommend signing a maintenance contract with the relevant service location ofthe manufacturer.Lifting and jacking up: When a fork lift truck is to be lifted, the lifting gear must onlybe secured to the points specially provided for this purpose. When the truck is to bejacked up, suitable measures must be taken to prevent the truck from slipping ortipping over (use of wedges, wooden blocks). Work underneath the raised load liftingdevice must only be carried out when the fork is immobilised and supported by achain of adequate strength.mCleaning operations: No inflammable liquids must be used when cleaning the forklift truck. Prior to commencing cleaning operations, all safety measures that arerequired to prevent sparking (e.g. by short-circuits) have to be taken. For batteryoperatedfork lift trucks, the battery plug must be removed. Only weak indraft, weakcompressed air and non-conducting, antistatic brushes must be used for the cleaningof electric or electronic assemblies.If the fork lift truck is to be cleaned using a water jet or a high-pressure cleaner, allelectric and electronic components must be carefully covered beforehand becausemoisture can lead to incorrect functioning.Cleaning by means of a steam jet is not permitted.Upon completion of cleaning work, the operations detailed in the section“Recommissioning” must be performed.1102.GBF 1