You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Disengaging the solenoid brake– Remove the cover from the rearelectronics compartment.– Screw in adjusting screws (43) at thesolenoid brake above the tractionmotor to disengage the brake.The screws are located on the rightside of the controller plate.m– Attach a towrope at the rear crane lugsand carefully pull the truck out of theaisle.Check the brake deceleration value.These works may only be performed bytechnicians authorised by themanufacturer.Adjusting the steering angleInsert an Allen key in the screw on the steering motor (44) and set the desired angleof the steered wheel.441102.GBE 41
Change language