EFXac 100/125 - Jungheinrich

ffPicking up and setting down a load in the aisleIn aisles the operator must pay specialattention. The aisle must not be enteredwhen persons or another truck is in theaisle. Also during the stacking procedurethe driver must make sure that personsor trucks do not enter the aisle. If this isthe case the truck must be stoppedimmediately and a warning signal mustbe issued.– Position the truck preciselyhorizontally and vertically in front ofthe rack shelf.– Pick up or set down the load (refer tosection “Picking up a load sideways”respectively “Setting down a load”).Special care must be taken whenworking at the first rack shelves, as thetruck is partly located outside the aisleand persons and trucks moving in thetravel range may be injured or damaged.AffTransporting loadsObserve clearance heights and widthsat doors and between racks.If the load is stacked high and obstructsthe view, a second person must bepresent for guiding.– Sensitively accelerate the truck andalways be prepared to apply thebrakes.Adapt the travel speed to the condition ofthe travel path and to the transportedload. Watch the traffic at intersectionsand passages and use the help of asecond person when negotiating unclearsections.1102.GBE 31