EFXac 100/125 - Jungheinrich

4.4 Picking up, transporting, and putting down load unitsmBefore picking up a load unit the driver must make sure that it has been correctlypalletised and does not exceed the permissible capacity of the truck. Observecarrying capacity diagram!f– Manually adjust the fork arms or reposition hydraulically, if necessary (o).The fork arms must be adjusted in such a way that both have the same distance tothe outside edges of the fork arm carriage and the load centre is centred between thefork arms. Fork arms must be locked!Picking up a load sidewaysf– Carefully approach the load to bepicked up in parallel to the load.– Do not actuate the foot switch.– Lift the load-carrying unit respectivelylower to the proper height with respectto the load, so that the fork arms canbe inserted under the load withoutdamaging it.Lifting persons is prohibited.f– Carefully insert the load-carrying unitunder the load until it makes contactwith the back of the fork.The fork arms must be inserted into theload with their full length.– Lift the load-carrying unit slightly sothat the load is clear off the ground.– Shift load-carrying unit in transportposition.AfThe swivel/traverse fork must beswivelled crossways to the traveldirection and must be positioned in leftrespectively right transport position.Make sure that nobody steps under thelifted load.– Once in the apron, lower the load totransport height.The picked up load can now betransported.1102.GBE 29