EFXac 100/125 - Jungheinrich

Adjusting the backrest:– Pull up the backrest adjustment (27) and set the backrest tilt to the desired position.– Allow backrest adjustment to latch.Adjusting the seating position:f– Pull driver seat locking lever (30) outward and set driver seat to the desired seatingposition by sliding it forward or backward.– Allow locking lever to latch again.The driver seat locking must be securely latched in the adjusted position. The driverseat setting must not be modified while travelling.Adjusting the armrest:– Rotate the handwheel (31) on the armrest up or down until the desired position hasbeen reached.3.4 Safety seat beltfPut on the safety seat belt every time before moving the industrial truck.The belt protects you from serious injuries.AffProtect the safety seat belt from dirt (e. g. cover up at standstill) and clean regularly.If the belt catch or retractor is frozen, let it thaw and allow to dry to avoid freezingagain.The drying temperature of the warm air must not exceed +60°!Modifications to the safety seat belt are not permitted!Increased risk through malfunctions.– Replace safety seat belts after an accident.– Use only original spare parts for retrofits and repairs.Damaged or non-functioning safety seat belts must be exchanged by authoriseddealers or in the subsidiary.1102.GBE 16