EFXac 100/125 - Jungheinrich

3 Starting up the truckfBefore starting or operating the truck, or before lifting any loads, the driver has tomake sure that nobody is within the danger area.The operating condition of the truck after switching on is indicated by the symbols inthe display.3.1 Checks and operations to be performed before starting daily work– Check the entire truck outside for obvious damages or leaks.– Check battery mounting, cable connections for damages and tight seat.– Check battery plug for tight seat.– Check overhead guard for damages.– Check load-carrying unit for noticeable damages such as cracks, bends or heavyabrasions on load fork.– Check condition of fork arm locks and stop bolts to prevent pushing the fork armsout to the side.– Check load wheels for damages.– Check whether the load chains are tensioned uniformly.– Check whether all safety devices are operational and function properly.– For rail guided trucks, check guide rollers for concentric running and damages.– Check function of service brake and parking brake.– Check the brake fluid level.– Check function of end-of-aisle safety device.– Check braking distance when EMERGENCY OFF switch is actuated during travel.– Check tilting safety for firm seating.1102.GBE 14