EFXac 100/125 - Jungheinrich

4 Removing and installing the batteryffffOnly batteries with isolated cells and insulated terminal connections are allowed.When replacing the battery, make sure only to use the same type as replacement.Additional weights must not be removed and their position not changed.The truck must be parked on a horizontal surface, so that the battery cannot roll outby itself when the battery securing device is removed.Connecting and disconnecting the battery plug and socket is only permitted with thetruck and charger switched off.When changing/installing the battery, make sure that the battery is seated firmly inthe battery compartment.f– Turn key switch to “0” (zero) and push the EMERGENCY OFF button.– Expose the battery (see section 2.1).– Unplug battery connector.– Lift out the frame side walls (2).– Loosen and remove the battery safety device (3).– Pull out the battery to the side onto the battery trolley provided.Replacing the battery is done in reverse order.After replacing the battery, check all cable and plugged connections for visibledamages and before recommissioning check that:– the battery safety device is inserted and tightened,– the battery cover is fully closed.231102.GBD 4