EFXac 100/125 - Jungheinrich

3 Charging the batteryffPark and lock the truck (refer to chapter E).– Turn key switch to “0” (zero) and push the EMERGENCY OFF button.– Fully open the battery cover.Connecting and disconnecting the battery plug and socket is only permitted with thetruck and charger switched off.ffff– Unplug battery connector.– If necessary, remove the rubber insulating mat from the battery.As hazardous gases are produced during the charging operation, sufficient fresh airsupply must be ensured.No metal objects must be placed on the battery. Prior to starting the rechargingoperation, check all cable connections and plugged connections for visible damage.– Connect charging cable of the battery charging station to the battery plug.– Switch on the charger.– Recharge the battery observing the instructions provided by the battery supplierand by the battery charger supplier.All safety instructions as provided by the battery supplier and battery charger suppliermust be strictly observed.Only chargers prescribed by the battery supplier may be used.1102.GBD 3