EFXac 100/125 - Jungheinrich

BTruck description1 Application descriptionThe EFXac 100/125 is an electric three-way lift truck which picks up, transports, andlifts its load outside the wheelbase. It can be used for internal goods traffic to stackand transport DIN 15142 pallets, DIN 15144 lattice box pallets, and other palletisedloads. If the EFXac 100/125 is used for assembly works with an according workingplatform, the load carrying unit must be supplied or approved by the manufacturer.For optimisation of the turnaround performance the truck can be operated diagonally,i. e. that travelling and lifting is possible simultaneously.The load fork can be designed for different load units. In case of the swivel/traversefork the distance between the fork arms is adjustable.For operation in aisles the EFXac 100/125 can be either be equipped with a railguidance system (RG) or inductive guidance system (IG). The driver can fullyconcentrate on his stacking work. Simultaneous travel and lifting is enabled in aisles.The activation is triggered by aisle detection sensors. Outside aisles the EFXac 100/125 can be freely moved, partly at restricted travel speeds depending on certain liftingheights.The racking systems must be suitable for the EFXac 100/125. The safety distancesrequired and prescribed by the manufacturer (e. g. prEN 1726-2 item 7.3.2) must bestrictly observed. The ground must comply with DIN 15185. For the rail guidancesystem (RG) the aisles must be equipped with guide rails.Vulkollan guide rollers screwed to the truck chassis guide the truck between the guiderails.For the inductive guidance system (IG) a guide wire must be installed in the ground,and the signals from the guide wires are received by sensors at the truck chassis andprocessed in the truck computer.Definition of the travel directionThe following definitions are made for the indication of the travel direction:leftdrivedirectionloaddirectionright1102.GBB 1