31.07.2015 Views

Technical Data Bulletin EPON™ Resin 828 - ChemCenters

Technical Data Bulletin EPON™ Resin 828 - ChemCenters

Technical Data Bulletin EPON™ Resin 828 - ChemCenters

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

RP: 3075 EPON <strong>Resin</strong> <strong>828</strong> Page 6Figure 2 / Viscosity - temperature profile for EPON <strong>Resin</strong> <strong>828</strong>10,000Viscosity, cP1,0001001070 80 90 100 110 120 130 140 150 160 170 180 190(27) (32) (38) (43) (49) (54) (60) (65.5) (71) (77) (82) (88)Temperature, °F (°C)Figure 3 / Specific gravity - temperature profile for EPON <strong>Resin</strong> <strong>828</strong>


RP: 3075 EPON <strong>Resin</strong> <strong>828</strong> Page 7Formulation andApplicationInformationFor additional performance characteristics information covering adhesives, laminating,casting and molding applications, consult bulletin SC:67, entitled "EPON <strong>Resin</strong> StructuralReference Manual." For epoxy resin amine-cured coatings, consult bulletin SC:193, entitled"Formulating Amine-Cured Coatings with EPON <strong>Resin</strong>."Figure 4 / Viscosity - temperature profile (for 5 samples of EPON <strong>Resin</strong> <strong>828</strong>ranging in viscosity from 110-150 poise)Packaging andStorageEPON <strong>Resin</strong> <strong>828</strong> is an undiluted liquid epoxy resin that is available in tank cars, tank trucksand 500 pound net closed head drums. EPON <strong>Resin</strong> <strong>828</strong> is normally shipped in bulk from 150°F (66 °C) to 180 °F (82 °C) and can be stored at 120-140 °F (49-60 °C) for ease of handling. Theviscosity/temperature profile and the specific gravity/temperature profile for EPON <strong>Resin</strong> <strong>828</strong>are displayed in Figures 2 and 3 respectively for your guidance.EPON <strong>Resin</strong> <strong>828</strong> is susceptible to crystallization upon prolonged storage at normal ambienttemperatures. It may be reconstituted by warming to 120-140 °F for 4-24 hours depending onthe mass involved.NOTE OF CAUTION: When checking viscosity of EPON <strong>Resin</strong> <strong>828</strong> incoming samples, wecaution you to make certain that the product is maintained at 25 +/- 0.01 °C before testing.You will note in Figure 4 that EPON <strong>Resin</strong> <strong>828</strong> can vary in viscosity by 10-15 poise for eachdegree in temperature the product varies from 25 °C.According to the Department of Transportation regulations (Code of Federal Regulations,Title 49), EPON <strong>Resin</strong> <strong>828</strong> is not classified or regulated as a flammable or combustiblematerial. No special labeling is required for transportation.For more storage information, please visit the “Shelf Life” section of our website at:www.hexion.com

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!