Grease separator

AccessoriesSeparator according to EN 1825 for underground installationIllustration and dimensioned drawing50-40070100Article descriptionSampling chamber Ø 400 made of polymerfor separation systems, for underground installationFor connection to outlet pipe of separator.For installation depth D = ...... .Inlet and outlet Ø 110/160 available options Ø 200 for synthetic materialpipes in: PE-HD (according to DIN 19537); PVC (according to DIN V19534);PP or AS. Sampling chamber middle diameter 400 mm, telescopic uppersection with clamping ring, cover Class A/B/D, screwed down odour-tight,drop height 120 mm.D900 110 160 160 110Installationdepth D (mm)* 400-1300* 400-1300Inlet/outletØ110/160200Class A915 880 AArt. #Class B915 880 BClass D915 880 D915 880 A-200 915 880 B-200 915 880 D-200120575750* Minimum installation depth can be achieved by cutting offExtension by 600 mm with extension section Art. # 915 402Extension sectionFor deep installationExtension height max. 600 mm (can be reduced).600ModelExtension height = 600 mmArt. #915 402440400640600160Remote ControlStorz-B-CouplingStainless steel access panelFor recessed wall installationwith Storz-B disposal pipe hook up connection and remote controlfor use with fully automated grease separators.Dimensions: 640 x 440 x 160 mm (Width x Height x Depth)Model: “Recessed”, 2 doors, lockableArt. #917 414600160Stainless steel access panelFor wall installationwith Storz-B disposal pipe hook-up connection and remote controlfor use with fully automated grease separators.Dimensions: 600 x 400 x 160 mm (Width x Height x Depth)Model: “Wall installation”, 2 doors, lockable400Remote ControlStorz-B-CouplingArt. #917 413Page 33