Grease separator

More documents

Recommendations

Info

Grease separator Euro “G”according EN 1825-1, NS 1/2/4for underground installationVariable upper section:inclinableheight adjustableby 100 to 550 mmIllustrationArticle descriptionGrease separator Euro “G” NS ...according to EN 1825, made of polymerfor underground installation,installation depth D = ..................... mm,with integrated sludge trap, upper section made of polymer,continuous height and level adjustment, can be tilted upto 5°, sealed odour-tight with cover Class B, D accordingto EN 124 in cast iron, incl. removal mechanism, certified statics.Inlet and outlet Ø 110 for synthetic material pipes in:PE-HD (according to DIN 19537); PVC (according toDIN V19534); PP or AS.Sludge trap content:...... Liter Manufacturer: KESSELSeparator content: ...... Liter Article #: .........................Weight: ...... kg Certification no. Z-54.1-440Delivery: System completely assembled.Handles groundwater depths up to 500 mmArt. # 93004/120D + 915880DInstallation site Nominal size Weight approx. Installation depth D Art. # Class B Art. # Class Dfor underground installation NS 1 111 kg550 to 950 mm 93 001/80 B 93 001/80 Dfrost free depth 800 mmNS 2 120 kg550 to 950 mm 93 002/80 B 93 002/80 D(Type 80)NS 4 130 kg550 to 950 mm 93 004/80 B 93 004/80 Dfor underground installationfrost free depth 1200 mm(Type 120)Dimensioned illustrationNS 1NS 2NS 4111 kg120 kg130 kgOther installation depths available on request800 to 1200 mm800 to 1200 mm800 to 1200 mm93 001/120 B93 002/120 B93 004/120 B93 001/120 D93 002/120 D93 004/120 D 875 610h2Inlet Dh1OutlethbaD = Installation depthØ = Outer diameterNominal sizeNS 1NS 2NS 4Ø110110110a138013801380b110611061106h*105013001550h15407901040h26108601110Wastewater contentSludge trap Separator140 l230 l200 l370 l400 l370 lGreaseseparator70 l120 l160 l* Details apply for Type 80. For Type 120 h* =h+250mmapplies.Page 28
DescriptionKESSEL Version „G“ separators are designed according to EN 1825-1.These separators distinguish themselves through their ease of installationand nearly maintenance free characteristics.According to DIN V 4040-2, the complete contents of the separatorshould be emptied, the unit cleaned and refilled with clean cold waterevery fourteen days or at a minimum of every month. To empty thecontents of the separator the cover needs to be removed. The separatoris then completely emptied and cleaned by the disposal truck.not possible, heated drainage piping should be used between the fixturesand the separator. It is important to note that the inlet level of theseparator must always be located below the frost level. This can beaccomplished by the use of the vertically adjustable upper section andby the use of an extension section when necessary. The separatormanhole covers for load classes B (12.5 ton) and D (40.0 ton) are odortight and secured with bolts according to EN 124.The underground separator should be located as close as possible tothe fixtures (drains) to which it is connected. In the case where locatingthe separator in close proximity to the fixtures which it drains isInstallation hintsThe underground separator must be placed on a firm and level base ofcompacted sand or gravel which will be able to support the predeterminedloads.The separator should then be placed in the prepared hole and filled withwater to the outlet level.The hole should be then filled and thoroughly compacted at equal increments(approx 0.5 meters) with sand or gravel. For separators needingto withstand heavy tractor trailer loads (up to 40.0 ton), please consultKESSEL for installation instructions.Connect the inlet and outlets of the separator to the drainage piping.Separators for underground installation below the groundwater level areavailable from KESSEL upon request.NoticeThe KESSEL Version ”G” underground separator should be installedonly in areas where:• the release of strong and aggressive odors will not pose a problem• accessing the separator with the disposal hose of the disposal truckwill not cause problems or inconveniences.Page 29
Page 1 and 2: Euro-Norm grease separators FROM KE
Page 3 and 4: Content1 General Informationpages4-
Page 6 and 7: Separator function based on EN 1825
Page 8 and 9: Grease separator Euro “E+S” PV
Page 10: Grease separator Euro “E+S” M a
Page 14 and 15: Grease separator Euro “D+S” acc
Page 16 and 17: Grease separator Euro “D” accor
Page 18 and 19: Grease separator Euro “G” accor
Page 20 and 21: Grease separator SE CNS for self-di
Page 22 and 23: Grease separator Euro “G” accor
Page 24 and 25: AccessoriesSeparator according to E
Page 30 and 31: Grease separator Euro “G”accord
Page 34 and 35: Size CalculationKESSEL-Calculation
Page 36 and 37: Size CalculationMethod 3: Q s -Calc
Page 38 and 39: Size Calculation3.2. Type of grease
Page 40: www.kessel.comQuality for more safe

Grease separator

Create successful ePaper yourself

Delete template?

Save as template?