Grease separator

Grease separator Euro “G” according to KESSEL Standards, NS 0.25/0.5/1for free standing installation in frost free areasIllustrationArticle descriptionArt. # 93 025Art. # 93 050Art. # 93 001Grease separator Euro “G” NS....according to KESSEL Standards, made of polymerFor free standing installation in frost free areas,with integrated sludge trap, domed cover made of polymer,with snap closures and sealed odour-tight.Inlet and outlet Ø ... for synthetic material pipes in:PE-HD (according to DIN 19537); PP, HT accordingto DIN 19560.Sludge trap content:... Liter Manufacturer: KESSELSeparator content: ... Liter Article #: ..........................Weight:... kgDelivery: System completely assembled.Based on EN 1825-1 the grease separators are intended foruse under the following conditions:- Connection of a commercial dishwasher with a minimumcycle time of 1.5 minutes- Consumption of rinsing water in a commercial dishwasherVS = max. 5 Liter- In addition to the dishwasher, a maximum of one drainagefacility is to be connected to the dishes pre-rinse (shortterm operation)Operating Instructions:The separated grease is to be decanted on a daily basis andemptied and cleaned once a week.Installation siteNominal sizeWeight approx.Article #Scope of deliveryfor free standing installationin frost free areasNS 0.25NS 0.5NS 120 kg45 kg65 kg93 02593 05093 001Container with domed coverand snap closuresDimensioned illustration510510500453710570520710570520990540Ø = Outer diameter11501020Nominal sizeNS 0.25NS 0.5NS 1Ø5050110Wastewater contentSludge trap Separator25 l28 l50 l42 l100 l75 lGreaseseparator15 l30 l60 l1200Page 22