Grease separator

More documents

Recommendations

Info

Grease separator Euro “G” according to EN 1825-1, NS 2/4/7/10for free standing installation in frost free areasIllustrationArticle descriptionGrease separator Euro “G” NS ...according to EN 1825,made of polymerFor free standing installation in frost free areas, with integratedsludge trap, domed covers made of polymer,with snap closures and sealed odour-tight.Inlet and outlet Ø ... for synthetic material pipes in:PE-HD (according to DIN 19537); PP, AS or HT accordingto DIN 19560.Sludge trap content:...... Liter Manufacturer: KESSELSeparator content: ...... Liter Article #: ........................Weight: ...... kg Certification no. Z-54.1-474Delivery: System completely assembled.On-site welding available on request.Retrofit set from Euro “G” to Euro “D” available on request.Art. # 93 002Installation siteNominal size*Weight approx.Article #Scope of deliveryfor free standing installationin frost free areas* other sizes and custom-made separatorsavailable on requestNS 2NS 4NS 7NS 1050 kg65 kg100 kg125 kg93 00293 00493 00793 010Container with domed coversand snap closuresDimensioned illustration420h2h1h3abØ = Outer diameterNominal sizeNS 2NS 4NS 7NS 10Ø110110160160a1030150016002430Access openingl1250181018502700x b670730990990h193093011301130h21000100012001200h31310131015601560Wastewater contentSludge trap Separator200 l 212 l400 l 354 l700 l 567 l1000 l 794 lGreaseseparator106 l177 l302 l423 lPage 18
DescriptionKESSEL Version „G“ separators are designed according to EN 1825-1.These separators distinguish themselves through their ease of installationand nearly maintenance free characteristics.According to DIN V 4040-2, the complete contents of the separatorshould be emptied, the unit cleaned and refilled with clean cold waterevery fourteen days or at a minimum of every month. To empty thecontents of the separator the odor tight covers need to be removed.The suction hose of the disposal truck is then used to empty and rinsethe inside of the separator.Installation hintsImportant is that a testing or sampling chamber is installed after the outletside of the separator.The separator is installed completely level on a flat firm surface in a frostfree area.The height of the room in which the separator is installed should alloweasy removal and access of the two lids.In the case that the outlet of the separator is located below the localdefined backwater level, a lifting station is to be installed according toDIN 1986-7. In situations where the interruption of separator service isnot allowable, a lifting station with double pumps is to be installed.NoticeThe KESSEL Version „G“ separator can be upgraded to a KESSELversion „D“ separator (with permanently installed disposal lines) atany time.The KESSEL Version ”G” separator should only be installed in areaswhere:• the release of strong and aggressive odors will not pose a problem• accessing the separator with the disposal hose of the disposaltruck will not cause problems or inconveniences.Page 19
Page 1 and 2: Euro-Norm grease separators FROM KE
Page 3 and 4: Content1 General Informationpages4-
Page 6 and 7: Separator function based on EN 1825
Page 8 and 9: Grease separator Euro “E+S” PV
Page 10: Grease separator Euro “E+S” M a
Page 14 and 15: Grease separator Euro “D+S” acc
Page 16 and 17: Grease separator Euro “D” accor
Page 20 and 21: Grease separator SE CNS for self-di
Page 22 and 23: Grease separator Euro “G” accor
Page 24 and 25: AccessoriesSeparator according to E
Page 28 and 29: Grease separator Euro “G”accord
Page 30 and 31: Grease separator Euro “G”accord
Page 34 and 35: Size CalculationKESSEL-Calculation
Page 36 and 37: Size CalculationMethod 3: Q s -Calc
Page 38 and 39: Size Calculation3.2. Type of grease
Page 40: www.kessel.comQuality for more safe

Grease separator

Create successful ePaper yourself

Delete template?

Save as template?