Grease separator

DescriptionKESSEL Version „D+S-P1“ grease separators are designed accordingto EN 1825-1 and are equipped with an automatically controlledpump for mixing and cleaning of the separator´s contents andinner walls. These separators are offered with a modern controlunit with digital display. It is now possible to automate specificsteps of the grease separator disposal process. The “D+S-P1”separators distinguish themselves through their ease of installationand nearly maintenance free characteristics.The advantage of the Version „D+S-P1“ separators is that disposalcan take place through permanently installed disposal lineswhile the twin covers of the separator remain closed. With thisadvantage, the disposal truck hooks up to a connection on an exteriorwall of the building and, using its own pump, suction out theentire contents of the separator without any unpleasant odorsescaping.The Shredder-Mix- System macerates and liquifies its contentsand also cleans its interiror walls all simultaneously. This preparedwastewater is then suctioned into the waiting disposal vehicle.According to DIN V 4040-2, the complete contents of the separatorshould be emptied, the unit cleaned and refilled with clean coldwater every fourteen days or at a minimum of once every month.Installation hintsA sampling chamber is to be installed immediately after the greaseseparator.The separator is installed completely level on a flat firm surface in afrost free area.The height of the room in which the separator is installed shouldallow easy removal and access of the two separator covers.In the case that the outlet of the separator is located below the localdefined backwater level, a lifting station is to be installed accordingto DIN EN 12056. In situations where the interruption of separatorservice is not allowable, a lifting station with double pumps is to beinstalled.NoticeThe KESSEL „D+S-P1“ grease separator is ideal for installationswhere the presence of strong odors during disposal of the separator´scontents can not be permittedThe “Shredder-Mix-System” liquifies, macerates and cleans theseparator´s contents all in one step.In circumstances where large amounts of sludge are expected (i.e.slaughterhouses / meat processing plants), the separator should beequipped with two macerating pumps - one pump for the wastewaterand grease, the second pump solely for the sludge. For furtherinformation please contact your KESSEL distributor.Page 13