KESSEL Grease separator “M” NG 2, 4, 7 and 10 For installation in ...

5. Disposal for grease separator acc. to. DIN 40405.1 For separators with manually automated disposalSeparators NG 2, NG 4, NG 7 and NG 10 acc. to DIN 4040Program Function Valve settingPump running time in secondsstepNG 2 NG 4 NG 7 NG 101 partial “Leeren” / empty 40 60 80 120empty2 mix “Mischen” / mix 120 180 200 3603 empty “Leeren” / empty 120 180 300 3604 fill “Mischen” / mix 100 100 140 2005 mix “Mischen” / mix 120 120 160 2406 empty “Leeren” / empty 30 30 60 607 fill “Spülen” / rinse 100 100 140 2008 rinse “Spülen” / rinse 60 90 100 1809 empty “Leeren” / empty 30 30 60 6010 fill “Spülen” / rinse 60 100 140 20011 rinse “Spülen” / rinse 60 90 100 18012 empty “Leeren” / empty 30 30 60 6013 fill “Leeren” / empty 300 420 500 1000Pump Valve warm Valve cold waterHintwateron off off Let the pump run until waterlevel has dropped by approx.30 cmon off offon off off until the pump runs dryoff on off approx. 25 cm filling levelon off offon off off until the pump runs dryoff on off approx. 25 cm filling levelon off offon off off until the pump runs dryoff on off approx. 25 cm filling levelon off offon on off until the pump runs dryoff off on upntil separator overflow levelTime settings can also be customized depending on pumping height, temperature or waterpressures. Flow rate through a DN 25 solenoid valve is 23 m3/hour.9