KESSEL Grease separator âMâ NG 2, 4, 7 and 10 For installation in ...
KESSEL Grease separator âMâ NG 2, 4, 7 and 10 For installation in ... KESSEL Grease separator âMâ NG 2, 4, 7 and 10 For installation in ...
Electrical SchematicElectrical schematicAttention!Connection should only be made by a licensed tradesman. Protective measures according to VDEand EVU should be followed. Control unit must not be installed in an explosion endangered area.Before commissioning set overload switch to I Nenn . Check for proper rotation of motor.Absicherung = fuse protectionSicherung = fuseTräge = inertTyp pumpe = pump typeNennleistung PN = nominal powerNennstrom IN = nominal currentKlemmleiste = connector block Ader Nr. = lead of cable n°Netzanschluß = public supplyPumpe = pumpStörmeldung = default indication18
Electrical SchematicFront view control unitPumpe ein = pump onStörung = defaultGrün = greenTypenschild = type labelPumpe aus = pump offFrontansicht = front viewRot = redHauptschalter rechts = main switch right19
- Page 1 and 2: INSTALLATION AND OPERATING INSTRUCT
- Page 6 and 7: 2. Installation2.3 Electrical Insta
- Page 9 and 10: 5. Disposal for grease separator ac
- Page 11 and 12: 6. MaintenanceMaintenance of the se
- Page 13 and 14: 7.3 Replacement Parts7. Accessories
- Page 15 and 16: Important contacts / InfoSeparator
- Page 17: Electrical SchematicElectrical sche
- Page 21: Everything for drainage Backwater v
Electrical SchematicElectrical schematicAttention!Connection should only be made by a licensed tradesman. Protective measures accord<strong>in</strong>g to VDE<strong>and</strong> EVU should be followed. Control unit must not be <strong>in</strong>stalled <strong>in</strong> an explosion endangered area.Before commission<strong>in</strong>g set overload switch to I Nenn . Check for proper rotation of motor.Absicherung = fuse protectionSicherung = fuseTräge = <strong>in</strong>ertTyp pumpe = pump typeNennleistung PN = nom<strong>in</strong>al powerNennstrom IN = nom<strong>in</strong>al currentKlemmleiste = connector block Ader Nr. = lead of cable n°Netzanschluß = public supplyPumpe = pumpStörmeldung = default <strong>in</strong>dication18