EasyClean Grease Separators - KESSEL

EasyClean Grease SeparatorsFor a clean environmentLeading in Drainage

Product InformationThe new KESSEL EasyClean grease separators bring ease of installation, cleaning performance and energy efficiency up to anew level. The curved shape of the tank allows integration of the complete technology - the refill inlet, for example - within thestanding area of the separator. It can also be set up directly at the wall, saving a great deal of space.Typically for KESSEL, EasyClean separators can be retrofitted up to the completely automatic system even while installed, and canthus be adapted to changing requirements.Improved cleaning resultsWedge-shaped bottom for extraction at the lowest point (only3 litres residual sludge volume). For nominal sizes NS 2 - NS 10.Low level of water consumption for cleaningWater consumption is up to 32% lower during cleaningthanks to wedge-shaped bottom and high-performancepump.New tank with corresponding designOptimum use of spaceThanks to the refill inlet integrated in the separator.This makes installation directly at the wall possible.Inspection windowcan be retrofitted(with drilling adapter)Minimum disposal timesUp to 40% shorter thanks to high-performance pump.Version G Basic can be retrofitted up to version PV+S Auto Mix & PumpVersion G BasicVersion PV+S Auto Mix & PumpKESSEL offers a factory extended guarantee of20 years on the polyethylenegrease separator tanks -this covers the structuralintegrity, watertightnessand usability of thepolyethylene components.WarrantyPolyethylene20 Years2

Product InformationEasy to cleanCrust formation on the walls is preventedby the surface finish, which is similar to wax.The system is easy to clean, leading to shorterdisposal times and lower cleaning waterconsumption.Planning made easy!Distinction between versions "in direction of flow right orleft" is no longer necessary. Direction of flow can bechanged on site by changing inlet and outlet.inletResistant to aggressive grease and wastewaterThe polyethylene separator material guarantees an extremelylong service life due to its corrosion free properties.outletNew tank size NS 3Installed nominal size NS 2can be upgraded to NS 3.Improved placement thanks to the curved shapeAlso ideal for retrofitting and renovation work in roomswith only very narrow access.Special offer packagesavailable with specialconditionsSelf-sealing,removable inletsand outlets (spigot)Straightforward maintenanceand inspectionSloped arrangement of the tankopenings permits better access.3

ØØØGrease separators for free standing installationEasyClean G Basic and EasyClean D Standard* Availability:NS 4: June 2013NS 2, 3, 7, 10: October 2013Illustration Article Description NSWeightemptyArticle #without SonicControl with SonicControlGrease separator EasyClean G Basicaccording to Euro Norm EN 1825,manufactured from virgin,non-recycled polyethylene.NS 2NS 3NS 4NS 7NS 1069 kg74 kg87 kg135 kg181 kg93 002.0193 003.0193 004.0193 007.0193 010.0193 002.0293 003.0293 004.0293 007.0293 010.02For free standing installation in frost protected areasVersion: Right side (can be changed to left side version by exchanging inlet and outlet).Accessories: Inspection window, refill inlet, sampling chamber, lifting station,retrofitting up to version PV+S possibleApproval: pendingDelivery:Version: Right side **System completely assembled,On-site-welding available on request.420lh3Other sizes available on requesth2h1Technical Information see page 7abNominalsize*NS 2NS 3NS 4NS 7NS 10Ø (Outerdiameter)110110110160160a15001500188019102590Access openingl17351735211521452820x b680680680940940h198598598511851185h210551055105512551255h314351435143516551655Wastewater contentSludge trap Separator200 l 400 l300 l 300 l400 l 400 l700 l 650 l1000 l 900 lGreasestorage100 l120 l160 l280 l400 lTotalvolume600 l600 l800 l1350 l1900 lIllustration Article Description NSWeightemptyArticle #without SonicControl with SonicControlGrease separator EasyClean DStandardwith direct disposalaccording to Euro Norm EN 1825,manufactured from virgin,non-recycled polyethylene.NS 2NS 3NS 4NS 7NS 1069 kg74 kg87 kg135 kg181 kg93 002.01/D93 003.01/D93 004.01/D93 007.01/D93 010.01/D93 002.02/D93 003.02/D93 004.02/D93 007.02/D93 010.02/DFor free standing installation in frost protected areasVersion: Right side (can be changed to left side version by exchanging inlet and outlet).Accessories: Inspection window, refill inlet, sampling chamber, lifting stationApproval: pendingDelivery:Version: Right side **System completely assembled,On-site-welding available on request.420lh3Other sizes available on requesth2h1Ø4Technical Information see page 7Nominal Ø (OuterAccess openingWastewater contentsize*NS 2NS 3NS 4NS 7NS 10diameter)110110110160160a15001500188019102590l17351735211521452820x b680680680940940h198598598511851185h210551055105512551255h314351435143516551655Sludge trap200 l300 l400 l700 l1000 lSeparator400 l300 l400 l650 l900 l** Connections for pump, disposal pipe and inspection window are on right side of separator (based on direction of flow)abGreasestorage100 l120 l160 l280 l400 lTotalvolume600 l600 l800 l1350 l1900 l

* Availability:NS 4: June 2013NS 2, 3, 7, 10: October 2013Grease Siphons separators de sol pour for parking free standing couvert installation EcogussA EasyClean l’intérieur des D+S bâtiments Mix and EasyClean selon la norme D+SP EN Auto 1253 MixIllustration Article Description NSWeightemptyArticle #without SonicControl with SonicControlGrease separator EasyClean D+S Mixwith direct disposal andShredder-Mix-System,according to Euro Norm EN 1825,manufactured from virgin,non-recycled polyethylene.NS 2NS 3NS 4NS 7NS 10145 kg150 kg163 kg211 kg257 kg93 002.01/DS93 003.01/DS93 004.01/DS93 007.01/DS93 010.01/DS93 002.02/DS93 003.02/DS93 004.02/DS93 007.02/DS93 010.02/DSFor free standing installation in frost protected areas, with inspection window and refill inlet.Version: Right side (can be changed to left side version by exchanging inlet and outlet).Accessories: sampling chamber, lifting stationApproval: pendingDelivery:Version: Right side **System completely assembled,On-site-welding available on request.Other sizes available on requesth2420lh1h3Øb1 = Installation dimensionsØTechnical Information see page 7Nominalsize*NS 21)NS 3NS 4NS 7NS 10Ø (Outerdiameter)110110110160160a15001500188019102590Access openingl17351735211521452820x b680680680940940b186086086011301130ah198598598511851185h210551055105512551255h314351435143516551655bb1Wastewater contentSludge trap Separator200 l 400 l300 l 300 l400 l 400 l700 l 650 l1000 l 900 lGreasestorage100 l120 l160 l280 l400 lTotalvolume600 l600 l800 l1350 l1900 lIllustration Article Description NSWeightemptyArticle #without SonicControl with SonicControlGrease separator EasyClean D+SPAuto Mixwith direct disposal andNS 2NS 3NS 4150 kg155 kg168 kg93 002.01/DSP93 003.01/DSP93 004.01/DSP93 002.02/DSP93 003.02/DSP93 004.02/DSPShredder-Mix-System,NS 7 216 kg 93 007.01/DSP 93 007.02/DSPaccording to Euro Norm EN 1825, NS 10 262 kg 93 010.01/DSP 93 010.02/DSPmanufactured from virgin,non-recycled polyethylene.For free standing installation in frost protected areas, with inspection window and refill inlet.Version: Right side (can be changed to left side version by exchanging inlet and outlet).Accessories: sampling chamber, lifting stationApproval: pendingDelivery:Version: Right side **System completely assembled,On-site-welding available on request.420lb1 = Installation dimensionsØOther sizes available on requesth2h1h3ØTechnical Information see page 7Nominalsize*NS 2NS 3NS 4NS 7NS 10Ø (Outerdiameter)110110110160160a15001500188019102590Access openingl17351735211521452820x b680680680940940b186086086011301130ah198598598511851185h210551055105512551255h314351435143516551655bb1Wastewater contentSludge trap Separator200 l 400 l300 l 300 l400 l 400 l700 l 650 l1000 l 900 lGreasestorage100 l120 l160 l280 l400 lTotalvolume600 l600 l800 l1350 l1900 l** Connections for pump, disposal pipe and inspection window are on right side of separator (based on direction of flow)5

Grease separators for free standing installationEasyClean M+S Mix & Pump and EasyClean PV+S Auto Mix & Pump* Availability:NS 4: June 2013NS 2, 3, 7, 10: October 2013Illustration Article Description NSWeightemptyArticle #without SonicControl with SonicControlGrease separator EasyClean M+SMix & Pumpwith Shredder-Mix-System andmanually controlled disposal,cleaning and refilling program,according to Euro Norm EN 1825,NS 2NS 3NS 4NS 7NS 10155 kg160 kg173 kg221 kg267 kg93 002.01/MS93 003.01/MS93 004.01/MS93 007.01/MS93 010.01/MSmanufactured from virgin, non-recycled polyethylene.For free standing installation in frost protected areas, with inspection window, refill inlet and pump.Version: Right side (can be changed to left side version by exchanging inlet and outlet).Accessories: sampling chamber, lifting station93 002.02/MS93 003.02/MS93 004.02/MS93 007.02/MS93 010.02/MSApproval: pendingDelivery:Version: Right side **System completely assembled,On-site-welding available on request.Other sizes available on requestTechnical Information see page 7Nominalsize*NS 2NS 3NS 4NS 7NS 10Ø (Outerdiameter)110110110160160a15001500188019102590h2420Access openingl17351735211521452820x b680680680940940lab186086086011301130h1h198598598511851185h3h210551055105512551255bb1h314351435143516551655[m]161412108642Wastewater contentSludge trap Separator200 l 400 l300 l 300 l400 l 400 l700 l 650 l1000 l 900 lb1 = Installation dimensions3,0 kW5 10 15 20 25 30 35 40 45 50 55Greasestorage100 l120 l160 l280 l400 lTotalvolume600 l600 l800 l1350 l1900 l[Qm 3 /h]Illustration Article Description NSWeightemptyArticle #without SonicControl with SonicControl6Approval: pendingDelivery:Version: Right side **System completely assembled,On-site-welding available on request.Other sizes available on requestTechnical Information see page 7Nominalsize*NS 2NS 3NS 4NS 7NS 10Ø (Outerdiameter)110110110160160a15001500188019102590h2Grease separator EasyClean PV+SAuto Mix & Pumpwith Shredder-Mix-System andfully automated disposal,cleaning and refilling program,according to Euro Norm EN 1825,NS 2NS 3NS 4NS 7NS 10160 kg165 kg178 kg226 kg272 kg93 002.01/PVS93 003.01/PVS93 004.01/PVS93 007.01/PVS93 010.01/PVSmanufactured from virgin, non-recycled polyethylene.For free standing installation in frost protected areas, with inspection window, refill inlet and pump.Version: Right side (can be changed to left side version by exchanging inlet and outlet).Accessories: sampling chamber, lifting station,420Access openingl17351735211521452820x b680680680940940lab186086086011301130h198598598511851185h1h3h210551055105512551255bb1h314351435143516551655** Connections for pump, disposal pipe and inspection window are on right side of separator (based on direction of flow)[m]161412108642Wastewater contentSludge trap Separator200 l 400 l300 l 300 l400 l 400 l700 l 650 l1000 l 900 lGreasestorage100 l120 l160 l280 l400 l93 002.02/PVS93 003.02/PVS93 004.02/PVS93 007.02/PVS93 010.02/PVSb1 = Installation dimensions3,0 kW5 10 15 20 25 30 35 40 45 50 55[Qm 3 /h]Totalvolume600 l600 l800 l1350 l1900 l

Siphons de sol pour parking couvert EcogussA l’intérieur des bâtiments selon la norme EN 1253Retrofitting and special offer packagesSimple conversion on site, even later!ComponentscontainedConverttoD Standardfor NS 2-7Art. # 913 101DD+S Mixfor NS 2-7Art. # 913 101DSfor NS 10Art. # 913 101DS10D+SP Auto Mixfor NS 2-7Art. # 913 101DSPfor NS 10Art. # 913 101DSP10M+S Mix&Pumpfor NS 2-7Art. # 913 101MSfor NS 10Art. # 913 101MS10PV+S Auto Mix&Pumpfor NS 2-7Art. # 913 101PVSfor NS 10Art. # 913 101PVS10Refill inletX X X XInspection windowX X X XRemote controlX2 actuator valvesXX1 hand valveXXSuctionpipeX X XPressurepipeXXControl unitX X XCosts even less when ordered in a package!Name Included Art. #Package 1 Sampling chamber horizontal, SonicControl 913 101Package 2 Sampling chamber vertical, SonicControl 913 102Package 2 (G and D) Refill inlet, Inspection window 913 103Technical noteProduction- and weather-related influences can lead to deviations from the catalogue dimensions in the case of free-standing separators.For this reason, please check the height specifications in particular for their actual size before installation. Please adapt the pipework to the actualinlet and outlet dimensions before installing the grease separator. Thermal and mechanical influences must be taken into consideration.7

www.kessel.comLeading in Drainage6 4Private homes withoutpublic sewage connection1 2 3 4 5Public buildings(e.g. hospital)1 2 3 4 5Public buildings(e.g. leisure facility)1 2 3 4 5Public buildings(e.g. hotel)4 5Public buildings(e.g. industrial /manufacturing facilities)2 3 5Public buildings(e.g. gas/petrol station)1 2 3 4Private homes/mulifamilyapartments/flats1 Backwater Valves 2 Backwater LiftingStation3 Lifting Stations 4 Drains / Channels 5 Separators 6 Wastewater TreatmentSystem010-568 KA / CS 03/13Right reserved for technical changes.KESSEL AG · Bahnhofstraße 31 · 85101 Lenting · Germany · info@kessel.comwww.kessel.com