Micro Motion® Insertion Density and Viscosity Meter Accessories

More documents

Recommendations

Info

Flow rate versus pipe diameter limits – 264 to 2640 gal/min (60 to 600 m 3 /hr)Installation guide selector – fork metersVelocity / flow rate limitsInstallation typeViscosity limit7826 (1)Density ±0.001g/cc7827 / 7828 / 7829Density ±0.001g/ccFlow-through chamber with 2˝ meter bore(1˝ or 2˝ pipeline)200 cP 1–10 gal/min (0.2–2.3 m 3 /hr) 1-10 gal/min (0.2–2.3 m 3 /hr)Flow-through chamber with 3˝ meter bore(2˝ or 3˝ pipeline)1000 cP 1–88 gal/min (0.2–19.9 m 3 /hr) 1-88 gal/min (0.2–19.9 m 3 /hr)Direct insertion/free-stream weldolet (2)20,000 cP
Ordering information – flow-through chambersModelProduct description782791 Flow-through chamber for 7826/7828 and 7827/7829 vibrating fork metersCode Inlet / Outlet Pipe size Flow Range Calibration BoundaryAvailable with all flow-through chamber connection to 782x optionsA 1-inch (25 mm) sch 80 5 - 40 l/min 2-inch Schd 40D 2-inch (50 mm) sch 80 5 - 40 l/min 2-inch Schd 40Available with flow-through chamber connection to 782x option N onlyB 1-inch (25 mm) sch 80 5 - 300 l/min 3-inch Schd 80E 2-inch (50 mm) sch 80 5 - 300 l/min 3-inch Schd 80G 3-inch (80 mm) sch 80 5 - 300 l/min 3-inch Schd 80Z ETO ETO refer to factoryCodeAZCodeBCCodeAB (1)C (1)G (1)H (1)NCodeABCGHJLNRTKMQSUPZMaterials316L Stainless SteelETOCertificationAvailable with all flow-through chamber connection to 782x optionsNoneAvailable with flow-through chamber connection to 782x option A & N onlyPED approvedFlow-through chamber connection to 782xAvailable with Inlet / Outlet Pipe Sizes A & D only2-inch ANSI 150RF Flanges2-inch ANSI 300RF Flanges - no certification2-inch ANSI 600RF Flanges - no certificationEN1092 RF DN50/PN40 - no certificationEN1092 RF DN50/PN100 - no certificationAvailable with all Inlet / Outlet Pipe Sizes1.5-inch Cone Seat Compression FittingProcess ConnectionsAvailable with all Inlet / Outlet Pipe Sizes A & B only1-inch ANSI 150RF Flanges1-inch ANSI 300RF Flanges1-inch ANSI 600RF FlangesEN1092 RF DN 25/PN40EN1092 RF DN 25/PN100Available with all Inlet / Outlet Pipe Sizes D & E only2-inch ANSI 150RF Flanges2-inch ANSI 300RF Flanges2-inch ANSI 600RF FlangesEN1092 RF DN 50/PN40EN1092 RF DN 50/PN100Available with all Inlet / Outlet Pipe Sizes G only3-inch ANSI 150RF Flanges3-inch ANSI 150RF Flanges3-inch ANSI 150RF FlangesEN1092 RF DN 80/PN40EN1092 RF DN 80/PN100Available with all Inlet / Outlet Pipe SizesWeld prepared endsETO Flange(1) Only available if Certification letter is ‘B’Micro Motion Insertion Density and Viscosity Meter Accessories 7
Page 3 and 4: Flow-through chambersAbout the flow
Page 5: Installation practices and sizingAs
Page 9 and 10: Ordering information - pipeline wel
Page 11: Micro Motion Insertion Density and

Micro Motion® Insertion Density and Viscosity Meter Accessories

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?